연구물
74건 검색
- 연구출판물 · 학술대회 발표논문Scopus Q4Study of Nanoindentation Properties of Mg-SiC/MWCNTs Hybrid Composites
- 연구출판물 · 학술지 논문JCR Q1Scopus Q1Pile-up and sink-in nanoindentation behaviors in AlCoCrFeNi multi-phase high entropy alloy
- 연구출판물 · 학술지 논문JCR Q3Scopus Q2In situ nanoindentation measurements of arc-evaporated Cr0.49Al0.51N, Al0.66Ti0.34N, and Al0.65Ti0.33Y0.02N films up to 800 degrees C
In situ nanoindentation measurements of arc-evaporated Cr0.49Al0.51N, Al0.66Ti0.34N, and Al0.65Ti0.33Y0.02N films up to 800 °c
- 연구출판물 · 학술대회 발표논문JCR Q4FINITE ELEMENT ANALYSIS OF THERMAL NANOINDENTATION PROCESS AND ITS EXPERIMENTAL VERIFICATION
- 연구출판물 · 학술지 논문JCR Q3Scopus Q2Substrate-independent stress-strain behavior of diamond-like carbon thin films by nanoindentation with a spherical tip
- 연구출판물 · 학술지 논문JCR Q1Scopus Q1Anomalous multiple pop-in behavior in Cu-Sn-based intermetallic compounds during nanoindentation
- 연구출판물 · 학술지 논문JCR Q1An investigation of thermal aging effects on the mechanical properties of a Ni3Al-based alloy by nanoindentation
- 연구출판물 · 학술지 논문JCR Q3Scopus Q1A robust method for extracting the mechanical properties of thin films with rough surfaces by nanoindentation
- 연구출판물 · 학술지 논문JCR Q3Nanoindentation behaviour of aluminium based hybrid composites with graphite nanofiber/alumina short fiber
- 연구출판물 · 학술지 논문JCR Q1Scopus Q1Nanoindentation experiments with different loading rate distinguish the mechanism of incipient plasticity
Chrobak, D.김광호Kurzydlowski, K. J.Nowak, R.
- 연구출판물 · 학술지 논문JCR Q2Evaluation of Mechanical Characteristics of the Plate-Type Polymer Hyperfine Pit Pattern by the Nanoindentation Process
- 연구출판물 · 학술지 논문JCR Q3Scopus Q2나노인덴테이션 방법으로 크롬 박막의 고유경도를 측정하는 방법과 영향 인자
Measurement of Intrinsic Hardness of Deposited Chromium Thin Films by Nanoindentation Method and Influencing Factors
- 연구출판물 · 학술지 논문JCR Q3Scopus Q2KCI Q1Berkovich 압자와 Cube-corner 및 Conical shape 압자를 이용해서 얻은 Cu(In,Ga)Se2 광흡수층 박막의탄성계수 및 경도의 불일치에 대한 고찰
Discrepancies in Nanoindentation Hardness and Modulus with a Berkovich, a Cube-corner, and a Conical Tip in a Cu(In,Ga)Se2 Light-Absorption Layer
- 연구출판물 · 학술지 논문JCR Q1Scopus Q1Precipitation of metastable intermetallic phases and nanoindentation behaviors of a Ti-20Zr-9 Nb-4Sn (at%) alloy during aging treatment
Lee, Won-TaeYeom, Jong-TaekKim, Jung GiOh, Jeong Seok이태경외 3명
- 연구출판물 · 학술지 논문JCR Q2Scopus Q2Evaluating the Adhesive Properties of Electroless Cu on Glass-reinforced Epoxy-based Build-up Dielectric Films via Nanoindentation
- 연구출판물 · 학술지 논문JCR Q2The surface characteristics of Al-7%Si aluminum alloy manufactured by thixo/rheoforming process through nanoindentation/atomic force microscopySource MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING2008피인용 2등재 SCIEScopus
- 연구출판물 · 학술지 논문JCR Q1Surface patterning for brittle amorphous material using nanoindenter-based mechanochemical nanofabrication
- 연구출판물 · 학술지 논문JCR Q3Development of evaluation technique for microcharacteristics of thixoforged wrought aluminum alloy by nanoindention and atomic force microscopy
- 연구출판물 · 학술지 논문Characterization of age-hardening behavior of eutectic region in squeeze-cast A356-T5 alloy using nanoindenter and atomic force microscope
Youn, S. W.강충길
Source MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING2006피인용 27등재 SCIEScopus - 연구출판물 · 학술지 논문JCR Q2Scopus Q2Mechanical behavior of ABS plastic-matrix nanocomposites with three different carbon-based nanofillers



로그인
홈
Researcher Page
ORCID
ISNI