본문 바로가기

Substrate-independent stress-strain behavior of diamond-like carbon thin films by nanoindentation with a spherical tip

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q3Scopus Q2
저널
JOURNAL OF MATERIALS RESEARCH33(6) · pp.699 · 2018
피인용
Web of Science 13Scopus 13
FWCI (Scopus)
0.25
JCR IF
JCR 2017 1.495
ISSN
0884-2914

저자

  1. 후지사와 나오키제1저자National Core Research Center for Hybrid Materials Solution, Pusan National University, Busan, South Korea
  2. 장텅페이National Core Research Center for Hybrid Materials Solution, Pusan National University, Busan, South Korea
  3. 리오이룬School of Materials Science and Engineering, Pusan National University, Busan, South Korea
  4. 김광호교신저자School of Materials Science and Engineering, Pusan National University, Busan, South Korea

초록

A method for extracting the substrate-independent stress-strain curves of thin films was developed using spherical nanoindentation to investigate the yield behavior of diamond-like carbon (DLC) thin films with Young's moduli of similar to 73 GPa and similar to 76 GPa. The resulting stress-strain curves showed that these films commence yielding at similar to 13 GPa and similar to 14 GPa, respectively. These yield strength values agree with the critical pressure necessary to initiate the transformation of sp(2)-bonded carbon into significantly harder sp(3)-bonded carbon, indicating that the yielding of the materials is associated with the sp(2)-to-sp(3) phase transition. The ability of a DLC film to accommodate a progressively increasing contact stress with strain beyond the yield point while dissipating part of the accumulated strain energy, as evidenced in this work, implies a unique mechanism of the brittle material for passively mitigating contact deformation and fracture in tribological applications.

키워드

stressstrain relationshipthin filmnanoindentationMECHANICAL-PROPERTIESELASTIC-MODULUSINDENTATIONPHASETRANSFORMATIONDEFORMATIONINDENTERSHARDNESSCURVESSTATE

식별자

Scopus EID
2-s2.0-85044620131
WoS UID
000430064100008