본문 바로가기

A single-powder strategy for LPBF and LDED processing of a BCC Nb–Ti–Zr alloy

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q1Scopus Q1
피인용
Web of Science 0Scopus 0
JCR IF
JCR 2024 6.6
ISSN
2238-7854

저자

  1. Chmielewska, Julia제1저자Empa Swiss Fed Labs Mat Sci & Technol, Lab Adv Mat Proc, Feuerwerkerstr 39, CH-3602 Thun, Switzerland
  2. Choma, TomaszWarsaw Univ Technol, Fac Mat Sci & Engn, Woloska 141, PL-02507 Warsaw, Poland
  3. Kalicki, BartoszWarsaw Univ Technol, Fac Mat Sci & Engn, Woloska 141, PL-02507 Warsaw, Poland
  4. Watroba, MariaEmpa Swiss Fed Labs Mat Sci & Technol, Lab Mech Mat & Nanostruct, Feuerwerkerstr 39, CH-3602 Thun, Switzerland
  5. Michler, JohannEmpa Swiss Fed Labs Mat Sci & Technol, Lab Mech Mat & Nanostruct, Feuerwerkerstr 39, CH-3602 Thun, Switzerland
  6. 박지영Pusan Natl Univ, Sch Mat Sci & Engn, Busan 46241, South Korea
  7. 이욱진Pusan Natl Univ, Sch Mat Sci & Engn, Busan 46241, South Korea
  8. Leinenbach, Christian교신저자Empa Swiss Fed Labs Mat Sci & Technol, Lab Adv Mat Proc, Feuerwerkerstr 39, CH-3602 Thun, Switzerland

초록

Refractory multi-principal element alloys offer high melting temperatures and compositional flexibility for structural applications under extreme conditions. In the Nb–Ti–Zr ternary system, Zr confers corrosion resistance and a low neutron capture cross-section, while Nb stabilizes the body-centered cubic (BCC) phase across a wide composition space, and Ti, the lightest constituent, lowers the alloy density. Here we report the first additive manufacturing of Nb25Ti20Zr55 by laser powder bed fusion (LPBF) and laser directed energy deposition (LDED) from a single prealloyed powder. Both routes produced intact builds with sparse pores across much of the processing window, with cracking confined to part of the LPBF range. Electron backscatter diffraction and X-ray diffraction indexed a predominantly BCC microstructure at Zr contents of 50.4 to 55.5 at.% across both routes. Ti evaporated preferentially, falling by 9.5 at.% from the feedstock in LPBF, yet the BCC phase was retained. The LPBF composition was uniform across the processing window. The LDED composition varied with energy density and approached the LPBF value only at the highest energy density. LPBF gave finer grains (96 μm) than LDED (140 μm) at equivalent hardness (H = 2.73 to 2.90 GPa) and Young's modulus (E = 79 to 83 GPa).

키워드

BCC phaseLaser directed energy depositionLaser powder bed fusionNb–Ti–ZrRefractory multi-principal element alloyUltrasonic atomization

식별자

Scopus EID
2-s2.0-105050429441
WoS UID
001879816200001