본문 바로가기

Substrate effects in VMoCe/TiO2 monolithic NH3-SCR catalysts under high-NOx model conditions relevant to ammonia co-firing power exhaust

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q1Scopus Q1
피인용
Web of Science 0Scopus 0
FWCI (Scopus)
0
JCR IF
JCR 2024 7.2
ISSN
2213-2929

저자

  1. Lee, Jong-Hoon제1저자Korea Inst Ind Technol, Low Carbon Energy Grp, Ulsan, 44413, South Korea
  2. Lee, Min EuiKorea Elect Power Corp Res Inst, Energy & Environm Lab, Daejeon 34056, South Korea
  3. Kim, HyejinKorea Inst Ind Technol, Low Carbon Energy Grp, Ulsan, 44413, South Korea
  4. Kim, Hee SooKorea Inst Ind Technol, Low Carbon Energy Grp, Ulsan, 44413, South Korea
  5. 임동하교신저자Pusan Natl Univ, Grad Sch Hydrogen & Next Energy Convergence, Busan 46241, South Korea

초록

High-NOx ammonia co-firing exhaust requires compact selective catalytic reduction systems that retain activity under sulfur- and water-containing conditions. This study compared SUS304 stainless-steel and cordierite ceramic monolith configurations coated with VMoCe/TiO2 at closely matched washcoat loadings under literature-informed synthetic-gas conditions. The feed contained 1000 ppm NO, 1000 ppm NH3, 8 vol% O2, and 10 vol% H2O at a nominal gas hourly space velocity of 20,000 h−1; 100 ppm SO2 was introduced during the poisoning and time-on-stream tests. After coating, the metallic configuration retained a larger open frontal area and smaller total coated-wall thickness, and the metallic holder–monolith assembly showed a 14–35% lower pressure drop than the ceramic configuration. At 350 °C, NO conversion reached 99.2% and 94.5% for the metallic and ceramic configurations, respectively. The apparent activation energies were 26.01 ± 1.25 and 27.35 ± 1.36 kJ mol−1, respectively, with substantially overlapping 95% confidence intervals, indicating comparable reactor-scale apparent kinetic behavior within the regression uncertainty. After sequential SO2/H2O exposure, activity recovery at 350 °C reached 97.7% and 95.0%, while post-reaction X-ray photoelectron spectroscopy showed residual surface sulfur concentrations of 1.1 and 1.8 at%, respectively. During 250 h of continuous SO2/H2O-containing operation at 300 °C, NO conversion remained above 92.4% for the metallic configuration and approximately 87.8% for the ceramic configuration. These results show distinct configuration-level hydraulic, catalytic, surface-sulfur, and time-on-stream responses under the tested conditions; validation using actual exhaust, bare-substrate controls, and broader application-specific operating conditions remains necessary.

키워드

Ammonia co-firingCordierite monolithMetallic monolithNH3-SCRSurface-sulfur responseTime-on-stream stability

식별자

Scopus EID
2-s2.0-105047331817
WoS UID
001853931600001