본문 바로가기

Edge-Cloud V2X Telemetry Pipeline and Operator Dashboard for Site-Level Supervisory Monitoring of Autonomous Mobile Units in Outdoor Industrial Sites

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q2Scopus Q1
저널
APPLIED SCIENCES-BASEL16(13) · #6682 · 2026
피인용
Web of Science 0Scopus 0
FWCI (Scopus)
0
JCR IF
JCR 2024 2.5
ISSN
2076-3417

저자

  1. Pak, Eun-Seong제1저자Korea Construct Equipment Technol Inst, 36 Sandan Ro, Gunsan Si 54004, South Korea
  2. Yoon, Bok-JoongKorea Construct Equipment Technol Inst, 36 Sandan Ro, Gunsan Si 54004, South Korea
  3. Lee, Kil-SooKorea Construct Equipment Technol Inst, 36 Sandan Ro, Gunsan Si 54004, South Korea
  4. Cha, Yong-ChulKorea Construct Equipment Technol Inst, 36 Sandan Ro, Gunsan Si 54004, South Korea
  5. 김화영교신저자Pusan Natl Univ, Sch Mech Engn, 2 Busandaehak Ro 63beon Gil, Busan 46241, South Korea

초록

Featured Application The proposed platform can be applied to site-level monitoring, reproducible telemetry logging, and operational decision support for autonomous mobile units deployed in container terminals, construction yards, and other harsh outdoor industrial sites.Abstract Outdoor industrial sites, including logistics terminals, construction yards, and civil infrastructure worksites, increasingly require supervisory systems for monitoring autonomous mobile units under variable wireless and operational conditions. This study presents an edge-cloud telemetry platform that connects V2X on-board and roadside units to a normalized data pipeline and an operator dashboard. The architecture assigns frame reception and data validation to the edge layer, while cloud services perform stream ingestion, storage, querying, and visualization using a Kafka-Elasticsearch-Grafana stack. A fixed supervisory schema was defined for position, heading, speed, mission state, battery level, and error flags so that virtual fields used in early validation can later be replaced by measured signals without changing downstream interfaces. Physical field validation was conducted using a single test vehicle in a construction-site emulation environment to evaluate communication continuity and dashboard refresh behavior. Multi-unit applicability was examined at the architecture and schema levels, and a preliminary payload-level capacity estimate was derived using the telemetry frequency and payload-length assumptions. Under the tested site conditions, the system maintained continuous reception and visualization over an approximately 700 m distance from the RSU-side reference location. The measured end-to-end display delay averaged 0.78 s, with a standard deviation of 0.059 s and a maximum of 0.96 s. Under a 10 Hz status-message condition, the estimated pure-payload traffic was approximately 23 kbps per mobile unit. These results indicate that V2X-based edge-cloud telemetry can provide a practical baseline for supervisory monitoring in outdoor industrial sites, while simultaneous multi-vehicle validation, detailed network-load evaluation, and long-term field testing remain necessary future work.

키워드

V2Xautonomous mobile unitsedge-cloud architecturesupervisory monitoringtelemetry pipelineKafkaElasticsearchGrafanadashboardoutdoor industrial sitesTAXONOMY

식별자

Scopus EID
2-s2.0-105044556935
WoS UID
001818089900001