본문 바로가기

Co-Deposition Behavior and High-Voltage Performance of NCM622/Ti4O7 Composite Cathodes Fabricated by Multi-Component Electrophoretic Deposition

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q3Scopus Q1
저널
ENERGIES19(13) · #3014 · 2026
피인용
Web of Science 0Scopus 0
FWCI (Scopus)
0
JCR IF
JCR 2024 3.2
ISSN
1996-1073

저자

  1. 박찬혁제1저자Pusan Natl Univ, Sch Mat Sci & Engn, Busandaehak Ro 63 Beon Gil, Busan 46241, South Korea
  2. 김성윤Pusan Natl Univ, Sch Mat Sci & Engn, Busandaehak Ro 63 Beon Gil, Busan 46241, South Korea
  3. 신헌철교신저자Pusan Natl Univ, Sch Mat Sci & Engn, Busandaehak Ro 63 Beon Gil, Busan 46241, South Korea

초록

Maintaining a conductive network is essential for achieving high energy density and long-term reliability in lithium-ion batteries. However, its stability is often compromised by structural non-uniformity, and under high-voltage operation, by the oxidative degradation of carbon-based conductive additives. To address these issues, we propose a composite cathode design that combines multi-component electrophoretic deposition (EPD) with a chemically stable Ti4O7 conductive oxide. The EPD conditions were systematically investigated, and an applied voltage of 100 V was identified as the standard voltage for controlling electrode loading while avoiding cracking and delamination under severe deposition conditions. The electrochemical performance of the EPD-derived electrodes depended strongly on the Ti4O7 content in the initial EPD suspension. Ti-0 and Ti-1, prepared from suspensions containing 0 and 1 wt% Ti4O7, respectively, maintained stable capacity delivery over a wide loading range, with areal capacities in good agreement with the theoretical values. In contrast, Ti-5, prepared from a suspension containing 5 wt% Ti4O7, exhibited significant capacity degradation and failed under high-loading conditions. High-voltage cycling over 50 cycles and impedance analysis further showed that Ti-1 exhibited better cycling behavior than Ti-0, with less pronounced resistance growth, whereas Ti-5 displayed poor cycling performance. These results suggest that multi-component EPD with an appropriate amount of Ti4O7 can provide a balanced hybrid conductive network for improving the relative high-voltage cycling behavior of cathodes within the tested condition.

키워드

lithium-ion batterieselectrophoretic depositionco-depositionTiOMagn & eacuteli phasehigh-voltage cathodesINTERCALATIONELECTRODELIFEPO4TI4O7

식별자

Scopus EID
2-s2.0-105044562702
WoS UID
001818444300001