본문 바로가기

Acoustic Emission Sensor Based on Diameter-to-Thickness Ratio Control of Lead-Free Piezoelectric Ceramics

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q3Scopus Q2
피인용
Web of Science 0Scopus 0
FWCI (Scopus)
0
JCR IF
JCR 2024 1.9
ISSN
1862-6300

저자

  1. 구보근제1저자Pusan Natl Univ, Dept Mat Sci & Engn, Busan, South Korea
  2. Kim, In-SungKorea Electrotechnol Res Inst, Energy Convers Res Ctr, Chang Won, South Korea
  3. Kim, Min-SooKorea Electrotechnol Res Inst, Energy Convers Res Ctr, Chang Won, South Korea
  4. Jeong, Soon-JongKorea Electrotechnol Res Inst, Energy Convers Res Ctr, Chang Won, South Korea
  5. Lim, Dong-HwanKorea Electrotechnol Res Inst, Energy Convers Res Ctr, Chang Won, South Korea
  6. Hong, Dong-SukTaihan Cable & Solut Co Ltd, Technol Res Ctr, Seoul, South Korea
  7. Kim, Hyun-JooTaihan Cable & Solut Co Ltd, Technol Res Ctr, Seoul, South Korea
  8. Shin, Dong-Jin교신저자Taihan Cable & Solut Co Ltd, Technol Res Ctr, Seoul, South Korea
  9. 조영래교신저자Pusan Natl Univ, Dept Mat Sci & Engn, Busan, South Korea

초록

Resonant acoustic emission (AE) sensors for high-voltage equipment typically rely on lead-based ceramics. This study optimizes the diameter-to-thickness (D/T) ratio of lead-free (Na0.51K0.47Li0.02)(Nb0.8Ta0.2)O3 (NKLNT) ceramics for low-frequency AE sensing. NKLNT disks (D = 12 mm, D/T = 1.5-6.0) were evaluated in the 100-300 kHz range. At D/T = 2.0, the ceramic exhibits the highest planar coupling (k p = 0.609) and stable resonance behavior with a Curie temperature of 328 degrees C. The optimized ceramic provides d 33 = 252 pC/N and g 33 = 20.9 & times; 10-3 V m/N. A packaged sensor prototype achieves a maximum sensitivity of 75 dB at 108.7 kHz in pencil-lead-break tests. Results demonstrate that geometric optimization effectively enhances the performance of high-T c lead-free AE sensors without altering measurement setups.

식별자

Scopus EID
2-s2.0-105040160216
WoS UID
001776715900001