본문 바로가기

Hydrocracking of polypropylene over Ni-loaded two-dimensional zeolite catalysts for LPG-rich hydrocarbon production

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널
FUEL427 · 2027
피인용
Web of Science 0Scopus 0
FWCI (Scopus)
0
ISSN
0016-2361

저자

  1. 정현지제1저자Pusan Natl Univ, Sch Chem Engn, Busan 46241, South Korea
  2. 김지찬Pusan Natl Univ, Sch Chem Engn, Busan 46241, South Korea
  3. 김한별Korea Inst Ind Technol KITECH, Ulsan Technol Applicat Div, Ulsan 44413, South Korea
  4. 무랄리 비슈누Pusan Natl Univ, Sch Chem Engn, Busan 46241, South Korea
  5. Jeong, Chang-HoonKorea Inst Ind Technol KITECH, Ulsan Technol Applicat Div, Ulsan 44413, South Korea
  6. 이만식Pusan Natl Univ, Dept Carbon Neutral & Climate Change, Major PNU KITECH Hydrogen & Next Energy Convergenc, Busan 46241, South Korea
  7. 제정호교신저자Pusan Natl Univ, Sch Chem Engn, Busan 46241, South Korea

초록

With the rapid increase in plastic consumption, there is a growing need for sustainable chemical recycling technologies capable of converting waste plastics into high-value fuels and chemicals. In this study, a bifunctional Ni/ITQ-2 catalyst was developed for the hydrocracking of polypropylene (PP), enabling the direct production of LPG (C3–C4 hydrocarbons). Catalyst screening for polypropylene hydrocracking was conducted over a series of zeolite supports with varying pore sizes and framework structures. Among the tested catalysts, Ni/ITQ-2 exhibited the most outstanding performance for LPG production. Based on this result, the catalytic behavior of Ni/ITQ-2 was systematically investigated with respect to the metal–acid balance and key reaction parameters. Complete conversion of polypropylene (100%) was achieved under mild conditions (250 ℃, 20 bar H2, and 2 h) accompanied by high LPG selectivity. Furthermore, the developed catalyst and reaction process were applied to real waste polypropylene feedstocks, and catalyst reusability tests demonstrated that the catalyst retained 100% conversion over three consecutive reaction cycles without noticeable deactivation, confirming its excellent regenerability and long-term stability. This study presents a practical and scalable catalytic pathway for the direct conversion of polypropylene waste into high-quality LPG, contributing significantly to the advancement of catalytic upcycling technologies for transforming plastic waste into valuable fuel resources.

키워드

HydrocrackingITQ-2NickelWaste plastic upcyclingZeolites

식별자

Scopus EID
2-s2.0-105038006256
WoS UID
001760381500001