Polyfunctional crosslinking architecture enabling rapid and solid additive manufacturing
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q1Scopus Q1
- 저널
- ADDITIVE MANUFACTURING121 · 2026
- 피인용
- Web of Science 1Scopus 1
- FWCI (Scopus)
- 1.21
- JCR IF
- JCR 2024 11.1
- ISSN
- 2214-8604
저자
- Hwang, Chiwon제1저자Korea Res Inst Chem Technol, Adv Specialty Chem, Ulsan 44412, South Korea
- Shin, SangbinKorea Res Inst Chem Technol, Adv Specialty Chem, Ulsan 44412, South Korea
- Bang, DaewonKorea Res Inst Chem Technol, Adv Specialty Chem, Ulsan 44412, South Korea
- Lee, Wonjoo교신저자Korea Res Inst Chem Technol, Adv Specialty Chem, Ulsan 44412, South Korea
- 안도원교신저자Pusan Natl Univ, Dept Polymer Sci & Engn, Busan 46241, South Korea
- Yu, Youngchang교신저자Korea Res Inst Chem Technol, Adv Specialty Chem, Ulsan 44412, South Korea
초록
This study introduces a branched polyfunctional crosslinking approach utilizing polyhydroxyurethane methacrylates (PHUMAs) to overcome the structural limitations of traditional linear polyurethane–methacrylates (PUMAs). Unlike linear systems that suffer from dilute and terminal crosslinking resulting in limited structural stability, our proposed backbone branched network achieves a concentrated crosslinking density localized around the polymer core, significantly enhancing structural integrity. Our primary strategy focuses on controlling gelation kinetics through this unique backbone-branched crosslinking architecture, which serves as a pivotal mechanism to precisely tailor mechanical properties. By utilizing a customizable hydroxyurethane architecture, the system accelerates gelation kinetics to facilitate rapid solidification during digital light processing (DLP)–based 3D printing, while simultaneously enabling the tunable control of material stiffness and strength. Experimental results demonstrated that the unique crosslinkable architecture significantly accelerated gelation kinetics, achieving a maximum polymerization rate (Rp) of 9.71, which directly facilitated rapid solidification and high-speed DLP printing. Furthermore, this kinetic control allowed for the precise tailoring of mechanical properties; specifically, by tuning the crosslinker functionality (f) from 0.89 to 9.75, the tensile strength was modulated from 3.23 MPa to 18.46 MPa. These findings verify that the PHUMA system offers a synergistic combination of optimized additive manufacturing efficiency and customizable structural performance.
키워드
NIPUPolyfunctional crosslinkingPolyhydroxyurethane-methacrylateRapid 3D printing
식별자
- Scopus EID
- 2-s2.0-105032868936
- WoS UID
- 001720525400001



로그인
연구물 목록으로