A numerical analysis of the propulsion efficiency improvement effect of pre-swirl flow control fins (FCF)
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- ESCIScopus
- 저널 순위
- JCR Q1Scopus Q1
- 저널
- RESULTS IN ENGINEERING29 · 2026
- 피인용
- Scopus 4
- FWCI (Scopus)
- 5.13
- JCR IF
- JCR 2024 7.9
- ISSN
- 2590-1230
저자
- 김현준제1저자Department of Naval Architecture & Ocean Engineering, Pusan National University, Busan 46241, South Korea
- 황보승면Global Core Research Center for Ships and Offshore Plants, Pusan National University, Busan 46241, South Korea
- 이인원교신저자Department of Naval Architecture & Ocean Engineering, Pusan National University, Busan 46241, South Korea
초록
The International Maritime Organization (IMO) has established regulations that impose penalties on not only newly built ships but also existing vessels in operation if they fail to reduce carbon emissions, and these regulations are being implemented in stages. In response, shipyards are making various efforts, such as developing energy-saving devices (ESDs). Among various ESDs, the widely used flow control fin is a device attached to the hull that generates vortices in the flow along the hull. This study introduces the pre-swirl flow control fin (FCF), a newly developed and effective energy-saving device derived from the conventional flow-control fin concept. When installed on the port side of the stern, the pre-swirl FCF generates a vortex whose tangential velocity produces a downwash opposite to the propeller’s rotational direction. As this vortex reaches the propeller plane, it counteracts part of the propeller-induced swirl, thereby reducing rotational energy losses. To assess the performance of the pre-swirl FCF, a model-scale CFD analysis was conducted using the commercial software STAR-CCM+ and the KRISO Container Ship (KCS) hull. After performing resistance analysis, the circulation (Γ) of the in-plane velocity at the wake plane was used as an indicator to quantitatively assess the intensity of the generated rotational flow. Finally, a self-propulsion analysis was carried out to verify the improvement in propulsion efficiency. As a result, it was confirmed that the increase in resistance due to the installation of the ESD was less than 1%, while the power delivered (2πnQ) was reduced by approximately 3%.
키워드
Asymmetric wakeCFDEnergy-saving devicePre-swirl flow control finSwirling flow
식별자
- Scopus EID
- 2-s2.0-105028330387



로그인
연구물 목록으로