AN EXPERIMENTAL STUDY ON COLLPASE MODE OF CONNECTIONS OF WEAK-AXIS SHORT-COLUMN STEEL BRACED FRAME
- 문서 유형
- 연구출판물 · 저서
- 등재
- Scopus
- 피인용
- Scopus 0
- FWCI (Scopus)
- 0
- ISSN
- 3006-5933
저자
초록
Pipelines for transporting various chemicals are supported by pipe rack structures. Therefore, if damage occurs to the pipe rack structure, secondary damage can be caused by leakage of the material carried along with the collapse of the structure. Pipe racks are generally steel structures consisting of beams and columns. In general, unlike braces installed in the strong-axis direction, braces may be installed in the weak-axis direction. However, since the research data on the weak axis direction brace frame is extremely limited, it is being applied in practice without being clearly identified. In the case of the weak axis column, the bending strength and shear strength are lower than that of the steel axis, so it is highly likely that defects will occur in the connections of the brace frame in the event of an earthquake. In the case of a frame with a short column length along with a weak axis, the entire frame performs plastic behavior after buckling before the connection fracture or beam-column plastic hinge, which is the ideal behavior of the brace frame presented in the standard. Static test and finite element analysis were conducted and the results were compared by selecting the most common weak axis brace frame among field details with short columns among pipe rack details to observe the collapse mode of the weak axis short column brace frame. As a result of the static test, the reduction of strength of the frame occurred due to the shear fracture at the loading part column web-gusset plate connection of the brace frame, and as a result of the finite element analysis, the most stress was generated at the loading part column web-gusset plate connection. Comparing the analysis and the experiment, it can be seen that the stress at the connection of one column web-gusset plate is concentrated. It was found that the stress was more concentrated at the connection of the loading part column web-gusset plate where the compression brace is located due to the buckling of the compression brace.
식별자
- Scopus EID
- 2-s2.0-105027872197



로그인
연구물 목록으로