본문 바로가기

Major variables for predicting pressure drops in membrane-based air-to-air energy recovery ventilator cores

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q3Scopus Q2
피인용
Web of Science 0Scopus 0
FWCI (Scopus)
0
JCR IF
JCR 2024 2
ISSN
1687-8132

저자

  1. 강율호제1저자Pusan Natl Univ, Res Inst Ind Technol, Busan, South Korea
  2. 안영철교신저자Pusan Natl Univ, Dept Architectural Engn, San 30, Busan 46241, South Korea

초록

This study quantifies and predicts the pressure drop (ΔP) of membrane-based energy recovery ventilator (ERV) cores using a controlled dataset comprising nine cores with three face sizes (150, 250, and 350 mm) and three channel heights (Hc = 1.8, 2.0, and 2.6 mm), evaluated at 61 operating points spanning 56–547 m3 h-1(Re = 94.8–1604.9) at 25°C and 50% RH. The cores were constructed with a 0.033- mm cellulose membrane and a 0.06- mm spacer and were tested using a ±1% differential pressure sensor (expanded uncertainty U ≤ 5.0 Pa at 95% confidence); pointwise repeatability (standard deviation) was 0.16–4.54 Pa. Measured ΔP ranged from 18.1 to 296.3 Pa. To remove length effects, we used the equivalent pressure drop Pe = ΔP/L and developed two closed form multivariate polynomial correlations: Case 1 based on opening ratio (OR) and channel velocity (uc), and Case 2 based on OR and Reynolds number (Re). Across the full dataset, both predictors showed high fidelity (R2 = 0.996 and 0.991), with maximum absolute errors of 12.19 and 16.23 Pa, respectively. In our judgment, OR and ucare the primary design variables for accurate, low- bias ΔP prediction in ERV cores. Therefore, we recommend adopting the Case 1 correlation particularly for ΔP < 100 Pa and selecting cores with larger Hc, where thermal efficiency targets permit, to reduce fan power. Overall, the dataset and equations provide practical guidance for blower sizing, core selection, and rapid design stage evaluation of ERV pressure losses.

키워드

membrane-based air-to-air energy recovery ventilatormultivariate polynomial regressionpressure dropventilationventilator core

식별자

Scopus EID
2-s2.0-105018768868
WoS UID
001594158700001