본문 바로가기

Laminar wake dynamics behind a trilobed cylinder

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q1Scopus Q1
저널
PHYSICS OF FLUIDS37(6) · #63601 · 2025
피인용
Web of Science 1Scopus 1
FWCI (Scopus)
0.22
JCR IF
JCR 2024 4.3
ISSN
1070-6631

저자

  1. Prabha, Naveen S.제1저자Govt Kerala, Coll Engn Trivandrum, Dept Mech Engn, Micro Nanofluid Res Lab, Thiruvananthapuram 695016, Kerala, India
  2. 쿠남쿠마라스난다쿠마르찬드란Pusan Natl Univ, Sch Mech Engn, Large Scale Computat Thermo Fluid Dynam Lab, Busan 46241, South Korea
  3. 하만영Pusan Natl Univ, Sch Mech Engn, Large Scale Computat Thermo Fluid Dynam Lab, Busan 46241, South Korea
  4. Ranjith, S. Kumar교신저자Govt Kerala, Coll Engn Trivandrum, Dept Mech Engn, Micro Nanofluid Res Lab, Thiruvananthapuram 695016, Kerala, India

초록

This study numerically examines the unsteady wake dynamics of a trilobed cylinder placed in a uniform flow at Reynolds numbers of up to 180. Two-dimensional finite volume simulations are performed to compare the hydrodynamics of a trilobed cylinder with those of an equivalent circular cylinder, aiming to elucidate vortex shedding and boundary layer evolution. To analyze the flow physics, the following parameters are computed: coefficients of drag (C(sic)D), lift ( C-Lrms), and pressure (C(sic)P); Strouhal number (St); wake length (L-w) and vortex formation length ( L-fu'u',L-c); separation and critical Reynolds numbers (Re-s and Re-c); vorticity and Q-criterion; along with steady and unsteady simulated parameters. Interestingly, flow separation and vortex shedding for a trilobed cylinder begin at Reynolds numbers Re-s=1.2 and Re-c=41, respectively, while for a circular cylinder, these phenomena occur at Re-s=5 and Re-c=47. Due to geometric symmetry, pressure distribution remains uniform across all Reynolds numbers with base suction decreasing until the critical Reynolds number (Re-c), then reversing. Both the mean drag coefficient and the lift coefficient for circular and trilobed cylinders exhibit similar trends: they decrease exponentially up to the critical Reynolds number (Re-c) and thereafter vary monotonically. Trilobed cylinders exhibit lower drag than circular cylinders at low Re, but this trend reverses at higher Re, while CLrms and St steadily increase, reaching higher values for trilobed cases. Empirical correlations developed for force coefficients and Strouhal number reveal a drag coefficient of 14% lower than a diamond, a lift coefficient of 55.56% higher than a circular cylinder, and a Strouhal number of 5.88% higher at Re=120. Furthermore, near Rec, vortex formation length exceeds wake length but converges at higher Re, with differences shrinking to below 3% at Re=180. The findings highlight trilobed cylinders' potential for flow control and energy manipulation in laminar regimes, laying a foundation for future studies on lobed geometries.

키워드

CIRCULAR-CYLINDERREYNOLDS-NUMBERSQUARE CYLINDERHEAT-TRANSFERNUMERICAL-SIMULATIONCFD SIMULATIONFLOWTRANSITIONWALLOPTIMIZATION

식별자

Scopus EID
2-s2.0-105010185871
WoS UID
001508434700016