본문 바로가기

Observation of interface disruption and Lomer-Cottrell locks in a crept L12-strengthened Ni-based superalloy

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q1Scopus Q1
피인용
Web of Science 21Scopus 25
FWCI (Scopus)
3.71
JCR IF
JCR 2024 7
ISSN
0921-5093

저자

  1. Ishtiaq, Muhammad제1저자Gyeongsang Natl Univ, Sch Mat Sci & Engn, Jinju 52828, South Korea
  2. Jung, Joong EunKorea Inst Mat Sci KIMS, Dept High Temp Mat, Chang Won 51508, South Korea
  3. Bae, Hyo JuGyeongsang Natl Univ, Sch Mat Sci & Engn, Jinju 52828, South Korea
  4. Yun, Dae WonKorea Inst Mat Sci KIMS, Dept High Temp Mat, Chang Won 51508, South Korea
  5. Kang, Sung-Gyu교신저자Gyeongsang Natl Univ, Sch Mat Sci & Engn, Jinju 52828, South Korea
  6. Zargaran, AlirezaPohang Univ Sci & Technol, Grad Inst Ferrous & Energy Mat Technol, Pohang 37673, South Korea
  7. Lee, Young-KookPohang Univ Sci & Technol, Grad Inst Ferrous & Energy Mat Technol, Pohang 37673, South Korea
  8. 최윤석Pusan Natl Univ, Sch Mat Sci & Engn, Pusan 46241, South Korea
  9. Seol, Jae Bok교신저자Kookmin Univ, Sch Mat Sci & Engn, Seoul 02707, South Korea

초록

High-temperature, creep-resistant Ni-based superalloys used in turbine blades for aviation and power generation offer a potential route toward global energy savings. However, the fundamental mechanisms governing their long-term creep failure remain insufficiently understood. In this study, we propose a compositionally modified Ni-based polycrystalline Inconel 738LC alloy by reducing Co and increasing Al content. This modification enhances the yield strength from 844 to 924 MPa and significantly improves creep resistance at 750 °C under 600 MPa compared to the conventional Inconel 738LC series. We investigated the creep deformation mechanisms by analyzing microstructural evolution—particularly at the γ/γ′ interfaces—using transmission electron microscopy (TEM) and atom probe tomography (APT). The results reveal that creep deformation generates stress concentration at the corners of cuboidal γ′ precipitates, leading to interfacial disruption and the formation of abundant Lomer–Cottrell (LC) locks. These features contribute to both localized softening and overall hardening effects. Further TEM dark-field imaging under two-beam conditions demonstrates that during the later stages of creep, LC dislocations are also formed along solute-segregated planar faults within the γ′ precipitates. These dislocations result from the cross-slip of [Formula presented][11‾2],[Formula presented][11‾0],[Formula presented][112‾] superpartial dislocations along the γ′ planar faults, from octahedral {111} planes to cubic {001} planes. Even though numerous twins and stacking faults (SFs) are additionally seen in the current alloy upon creep, the presence of LC-locking sessile dislocations—formed at both the γ′/γ interfaces and along solute-rich planar faults within the γ′ precipitates—emerged as a key feature contributing to the enhanced creep resistance. Their formation hinders dislocation motion and stabilizes the microstructure under prolonged thermal stress. Consequently, these γ′-LC dislocations and the associated interface-disrupted configurations collectively improve creep strength and extend rupture life. This study offers valuable insights into LC locks-mediated creep mechanisms, highlighting a promising pathway for the design of next-generation Ni-based superalloys.

키워드

Creep resistanceHigh-temperature applicationsLomer-Cottrell lockNickel-based superalloysPlanar defectLOW-STRESS CREEPHIGH-TEMPERATUREDEFORMATION MECHANISMSBEHAVIORCRDISLOCATIONSSEGREGATIONEVOLUTIONDIFFUSIONALLOYS

식별자

Scopus EID
2-s2.0-105006609678
WoS UID
001504733800001