A High-Resolution Solid-State LiDAR Sensor With Reconfigurable Histogramming Time-to-Digital Converter and Filter for Depth Refinement
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q1Scopus Q1
- 저널
- IEEE JOURNAL OF SOLID-STATE CIRCUITS60(10) · pp.3665 · 2025
- 피인용
- Web of Science 4Scopus 5
- FWCI (Scopus)
- 1.01
- JCR IF
- JCR 2024 5.6
- ISSN
- 0018-9200
저자
- Roh, Wonjong제1저자Sungkyunkwan Univ, Dept Elect & Comp Engn, Suwon 16419, South Korea
- 서형석Pusan Natl Univ, Dept Semicond Engn, Busan 46241, South Korea
- Piao, CanxingSolidVue, Seongnam 13449, South Korea
- Kim, MinkyungSungkyunkwan Univ, Dept Elect & Comp Engn, Suwon 16419, South Korea
- Jeon, TaehoonSungkyunkwan Univ, Dept Semicond & Display Engn, Suwon 16419, South Korea
- Lee, HeesungSolidVue, Seongnam 13449, South Korea
- Lee, Myung-JaeKorea Inst Sci & Technol, Postsilicon Semicond Inst, Seoul 02792, South Korea
- Chun, Jung-HoonSolidVue, Seongnam 13449, South Korea
- Kim, Seong-Jin교신저자Ulsan Natl Inst Sci & Technol, Dept Elect Engn, Ulsan 44919, South Korea
- Choi, Jaehyuk교신저자SolidVue, Seongnam 13449, South Korea
초록
An area-efficient, high-resolution CMOS light detection and ranging (LiDAR) capable of generating 400 x 112 depth images is proposed. This sensor employs a rolling-scan architecture that is compatible with a row-addressable solid-state LiDAR system. To achieve high resolution, a single-photon avalanche diode (SPAD) analog front-end (AFE) circuit was implemented using only five nMOS transistors. A reconfigurable-resolution (RR) hTDC, capable of converting one-/two-channel signals with variable time resolutions of 1, 2, or 4 ns, is further proposed to implement a 400-channel histogramming time-to-digital converter (hTDC) with low memory overhead. The sensor leverages RR-hTDC to support two image resolution modes: macro and quadruple resolution (QR). In the macro mode, 200 x 56 depth images can be acquired with a 1-ns time resolution. In the QR mode, the sensor can achieve 400 x 112 high-resolution depth images with a 2-ns time resolution. In the range-enhanced (RE) mode, the time resolution is halved for distances beyond 100 m, enabling the detection range to be extended up to 200m. A laser profile-based depth refining (DR) filter was used to compensate for the reduction in time resolution and ensure sub-centimeter time resolution, improving depth precision by 40% compared with the conventional QR mode. The prototype LiDAR sensor was fabricated as a 90-nm CMOS image sensor (CIS) process. In outdoor conditions under 135-klx sunlight, the worst case depth precision and accuracy for distances of 15–60 m were measured as 10 and 17 cm, respectively. Moreover, a relative precision of less than 0.18% was achieved over a 60–130-m range under 90-klx sunlight. The total power consumption of the sensor was measured to be 572 mW when operating at 20 frames/s under 70-klx sunlight.
키워드
CMOS depth sensordepth refining filter (DRF)direct time of flight (dToF)high-resolution LiDARhistogramming time-to-digital converter (hTDC)light detection and ranging (LiDAR)reconfigurable-resolution hTDC (RR-hTDC)single-photon avalanche diode (SPAD)SPAD analog front end (AFE)FLASH LIDARRANGESOC
식별자
- Scopus EID
- 2-s2.0-105007614140
- WoS UID
- 001504195400001



로그인
연구물 목록으로