본문 바로가기

Visualization of liquid ammonia spray from multi-hole injector in constant volume chamber with compressed condition

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q3Scopus Q2
저널
JOURNAL OF VISUALIZATION28(4) · pp.741 · 2025
피인용
Web of Science 1Scopus 1
FWCI (Scopus)
0.21
JCR IF
JCR 2024 2.3
ISSN
1343-8875

저자

  1. 오진호제1저자Pusan Natl Univ, Sch Mech Engn, Busan 46241, South Korea
  2. Seo, HyundukHanhwa Aerosp Co, Daejeon, South Korea
  3. 윤은구교신저자Pusan Natl Univ, Ecofriendly Smart Ship Parts Technol Innovat Ctr, Busan 46241, South Korea
  4. 김현동Pusan Natl Univ, Rolls Royce Univ Technol Ctr, Busan 46241, South Korea
  5. 오세철교신저자Pusan Natl Univ, Sch Mech Engn, Busan 46241, South Korea

초록

In this study, we injected liquid ammonia in a constant volume chamber and observed the changes of the spray morphology and propagation characteristics under various chamber pressures. The constant volume chamber had a 100 x 100 x 100 mm3 inner volume and a multi-hole injector was put at the top of the chamber. The chamber pressure was controlled by nitrogen gas and set to 10 bar and 70 bar at constant temperature of 100 degrees C. The spray morphology was captured by a high-speed camera with 9,000 fps and 10 mu s exposure time. The spray morphology shows a jet shape at the low chamber pressure because the momentum of ammonia is high enough to push out nitrogen gas. An entrainment region opposite to the mainstream of the jet at the tip was observed. Diluted ammonia was also observed around the jet in the influence of atomization from flash boiling at the jet morphology. When the chamber pressure was increased to 70 bar, the liquid ammonia was dispersed to radial direction and formed a cone shape morphology due to high resistance of the ambient nitrogen. Clear ammonia morphology was observed around the spray compared to the jet shape turns out to be a non-flash boiling condition.

키워드

Liquid ammonia6-hole injectorSpray morphologyConstant volume chamber

식별자

Scopus EID
2-s2.0-105005260041
WoS UID
001489310700001