본문 바로가기

Carbon compounds, internal stress and hydrogen permeability in carbon-doped TiZrN coatings by laser ablation

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q1Scopus Q1
저널
CERAMICS INTERNATIONAL51(16) · pp.21987 · 2025
피인용
Web of Science 1Scopus 1
FWCI (Scopus)
0.19
JCR IF
JCR 2024 5.6
ISSN
0272-8842

저자

  1. Kim, Seonghoon제1저자Korea Inst Mat Sci, Extreme Mat Res Inst, Chang Won 51508, South Korea
  2. 홍은표Korea Testing Lab, Mech & Mat Technol Ctr, Jinju 52852, South Korea
  3. Choi, Young-kyuKorea Testing Lab, Mech & Mat Technol Ctr, Jinju 52852, South Korea
  4. Lee, SeahoonKorea Inst Mat Sci, Extreme Mat Res Inst, Chang Won 51508, South Korea
  5. Lee, YoungjaeKorea Inst Ind Technol, Res Inst Sustainable Dev Technol Low Carbon Emiss, Cheonan 31056, South Korea
  6. Choi, YongsupKorea Inst Fus Energy, Inst Plasma Technol, Gunsan 54004, South Korea
  7. 이희수교신저자Pusan Natl Univ, Sch Mat Sci & Engn, Busan 46241, South Korea

초록

Internal stress has emerged as a crucial factor in determining the lifetime of hydrogen permeation barrier coatings, as it influences the hydrogen isotope diffusion and crack propagation. Here, we fabricated carbon-doped TiZrN coatings under different laser outputs, and investigated the changes in hydrogen permeability due to carbon compound formation and internal stress induced by laser shock peening. Based on ToF-SIMS, the carbon penetration depth in the coating was confirmed to be up to 500 nm, depending on the laser output. Using XPS and Raman analysis, it was confirmed that doped carbon substituted nitrogen sites in TiZrN, forming TiC and ZrC, and increasing carbide content from 4.1 % to 7.4 %. Notably, as the laser output increased from 30 % to 40 %, the sp2/sp3 ratio rose from 1.33 to 2.67, and the ID/IG ratio increased from 0.81 to 1.33, indicating the formation of an amorphous carbon-embedded (Ti, Zr)(C, N) structure. This was complemented by the transformation of the TEM-SAED pattern from dot patterns to ring patterns. The internal stress in carbon-doped TiZrN coatings increased from 4.323 GPa before carburization to a maximum of 5.620 GPa. The increase in residual compressive stress led to a reduction in hydrogen permeability by up to 69 %, 57 %, and 24 % at 573 K, 673 K, and 773 K, respectively. This study advances the understanding of carbon compound formation and internal stress changes in TiZrN coatings under different laser output. It demonstrates that the formation of residual compressive stress due to laser shock peening significantly influences the hydrogen permeability by inhibiting hydrogen isotope diffusion and crack propagation within the coating.

키워드

Amorphous carbon embedded (Ti, Zr)(C, N)Carbon diffusion behaviorHydrogen permeationLaser carburizationResidual stressBARRIER COATINGSRESIDUAL-STRESSTEMPERATURESTEELEMBRITTLEMENTPERFORMANCEBEHAVIORFILMSDEPOSITIONCORROSION

식별자

Scopus EID
2-s2.0-86000365408
WoS UID
001510966200001