본문 바로가기

전자차단층 도입을 통한 전체 용액공정 기반의 역구조 InP 양자점 발광다이오드의 성능 향상

Improved Performance of All-Solution-Processed Inverted InP Quantum Dot Light-Emitting Diodes Using Electron Blocking Layer

문서 유형
연구출판물 · 학술지 논문
등재
KCIScopus
저널 순위
Scopus Q4KCI Q3
저널
센서학회지33(4) · pp.224 · 2024
피인용
Scopus 2KCI 1
FWCI (Scopus)
0.26
ISSN
1225-5475

저자

  1. 노희재제1저자Department of Electrical Engineering, Pusan National University, 2, Busandaehak-ro 63, beon-gil, Geumjeong-gu, Busan, 46241, Korea
  2. 이경은Department of Electrical Engineering, Pusan National University, 2, Busandaehak-ro 63, beon-gil, Geumjeong-gu, Busan, 46241, Korea
  3. 배예윤Department of Electrical Engineering, Pusan National University, 2, Busandaehak-ro 63, beon-gil, Geumjeong-gu, Busan, 46241, Korea
  4. 이재엽Department of Electrical Engineering, Pusan National University, 2, Busandaehak-ro 63, beon-gil, Geumjeong-gu, Busan, 46241, Korea
  5. 노정균교신저자Department of Electrical Engineering, Pusan National University, 2, Busandaehak-ro 63, beon-gil, Geumjeong-gu, Busan, 46241, Korea

초록

Quantum dot light-emitting diodes (QD-LEDs) are emerging as next-generation displays owing to their high color purity, wide colorgamut, and solution processability. Enhancing the efficiency of QD-LEDs involves preventing non-radiative recombination mechanisms,such as Auger and interfacial recombination. Generally, ZnO serves as the electron transport layer, which is known for its highermobility compared to that of organic semiconductors and can lead to excessive electron injection. Some of the injected electrons passthrough the quantum dot emissive layer and undergo non-radiative recombination near or within the organic hole transport layer (HTL),resulting in HTL degradation. Therefore, the implementation of electron blocking layers (EBLs) is essential; however, studies on allsolution-processed inverted InP QD-LEDs are limited. In this study, poly(9-vinylcarbazole) (PVK) is introduced as an EBL to mitigateHTL degradation and enhance the emission efficiency of inverted InP QD-LEDs. Using a single-carrier device, PVK was confirmedto effectively inhibit electron overflow into the HTL, even at extremely low thicknesses. The optimization of the PVK thickness alsoensured minimal disruption of the hole-injection properties. Consequently, a 1.5-fold increase in the maximum luminance was achievedin the all-solution-processed inverted InP QD-LEDs with the EBL.

키워드

Quantum dotQuantum dot light-emitting diodesElectron blocking layerSingle carrier deviceAll-solution-process

식별자

Scopus EID
2-s2.0-85202531743
KCI
ART003104407