본문 바로가기

Performance Assessment of Vitiated Air Heater by Numerical Combustion Analysis for Direct-Connect Scramjet Test Facility

문서 유형
연구출판물 · 학술대회 발표논문
등재
Scopus
피인용
Scopus 2
FWCI (Scopus)
0.57

저자

  1. 성부경제1저자Dept. of Aerospace Engineering, Pusan National University, Busan, 46241, Korea
  2. 정승민Dept. of Aerospace Engineering, Pusan National University, Busan, 46241, Korea
  3. 김민수Dept. of Aerospace Engineering, Pusan National University, Busan, 46241, Korea
  4. 최정열교신저자Dept. of Aerospace Engineering, Pusan National University, Busan, 46241, Korea

초록

Large eddy simulation (LES) is employed to elucidate the combustion characteristics of the designed vitiated air heater (VAH) intended for direct-connect supersonic combustor (DCSC). The simulations are conducted using the ‘reactingFoam’ solver within OpenFOAM. The VAH is tailored to deliver a stagnation enthalpy suitable for flight Mach numbers of 4.0- 5.0, corresponding to total temperature and total pressure conditions of 1,578 K and 1.73 MPa, respectively. The VAH configuration encompasses a GH2/GO2 single coaxial shear injector responsible for heat addition, supplemented by 24 encircling air injectors that provide both air supply and film cooling. The introduction of coolant injection not only thermally insulates the combustor wall but also augments turbulent motion through the formation of a recirculation zone, strategically positioned between the coolant flow and the coaxial shear injector flow. The combustion process, completed within the initial one-third length of the combustor, results in a uniform total temperature distribution that aligns with the intended adiabatic flame temperature. The operating range of the vitiated air heater has been analyzed and gained through the comparison with the supersonic nozzle performance from the experiment.

식별자

Scopus EID
2-s2.0-85194061638