본문 바로가기

Bi-Objective Function Optimization for Welding Robot Parameters to Improve Manipulability

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q1Scopus Q1
저널
APPLIED SCIENCES-BASEL14(8) · 2024
피인용
Web of Science 0Scopus 0
FWCI (Scopus)
0
JCR IF
JCR 2023 2.5
ISSN
2076-3417

저자

  1. 이동준제1저자School of Mechanical Engineering, University of Pusan, Busan, 46241, Republic of Korea
  2. 진상록교신저자School of Mechanical Engineering, University of Pusan, Busan, 46241, Republic of Korea

초록

This paper presents a study on optimal design to determine the installation position and link lengths of a robot within a designated workspace for welding, aiming to minimize singularities during the robot’s motion. Bi-objective functions are formulated to minimize singularities while maximizing the volumes of linear velocity manipulability ellipsoid and angular velocity manipulability ellipsoid, respectively, ensuring isotropy. We have constructed a simulation environment incorporating PID control to account for robot tracking errors. This environment was utilized as a simulator to derive a Bi-objective function set within a genetic algorithm. Through this, we optimized four robot link length variables and two installation position variables, selecting the optimal design variables on the Pareto Front. In the standard work object, the volume average of the linear velocity manipulability ellipsoid was confirmed to have improved by 72% compared to the initial level, and the isotropy of the angular velocity manipulability ellipsoid was confirmed to have improved by 23% compared to the initial level. Furthermore, correlation analysis between design parameters identified those with a high correlation with the objective functions, and the analysis results are discussed.

키워드

genetic algorithmmanipulability ellipsoidoptimal designPareto optimalrobot manipulabilitysingularity avoidance

식별자

Scopus EID
2-s2.0-85192509772
WoS UID
001209902700001