본문 바로가기

Numerical Study on Electromagnetic Hydraulic Forming Process to Overcome Limitations of Electromagnetic Forming Process

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q1Scopus Q2
저널
MATERIALS17(7) · 2024
피인용
Web of Science 1Scopus 3
FWCI (Scopus)
0.28
JCR IF
JCR 2023 3.1
ISSN
1996-1944

저자

  1. 김연복제1저자Pusan Natl Univ, Dept Aerosp Engn, Busan 46241, South Korea
  2. 김정교신저자Pusan Natl Univ, Dept Aerosp Engn, Busan 46241, South Korea

초록

This paper provides a comparison between the conventional Electromagnetic Forming (EMF) technique and the novel Electromagnetic Hydraulic Forming (EMHF) approach. The EMHF involves the use of finite element analysis coupled with the EM and arbitrary Lagrangian–Eulerian techniques analyzed through LS-DYNA. In the free-bulge configuration, EMF is influenced by the forming coil, resulting in a dead zone and uneven forming. Additionally, EMF can only be used to shape materials with high electrical conductivity. In contrast, EMHF, driven by induced hydraulic pressure from the electromagnetic field-affected drive sheet, is independent of the electrical conductivity of the material and produces dome-shaped workpieces. For rectangular die shapes, EMF is prone to collision owing to the acceleration of the blank, which results in a reduced quality owing to bouncing. However, EMHF exhibits no bouncing effect and successfully achieves the target shape in most cases. The two techniques differ in the strain rate, with EMF at 4850/s, whereas EMHF operates at approximately 1250/s. Despite being slower, EMHF is still a high-speed forming technique. In conclusion, EMHF is a promising technique capable of addressing the shortcomings of conventional EMF and achieving improvements in forming processes.

키워드

Electromagnetic Forming (EMF)Electromagnetic Hydraulic Forming (EMHF)finite element analysis (FEA)high-speed formingSHEETACTUATOR

식별자

Scopus EID
2-s2.0-85190305234
WoS UID
001201159400001