본문 바로가기

Effect of post-weld heat treatment on the corrosion behavior of resistance spot welded super duplex stainless UNS S 32750

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q4Scopus Q3
피인용
Web of Science 13Scopus 13
FWCI (Scopus)
0.26
JCR IF
JCR 2018 1.284
ISSN
1452-3981

저자

  1. 신병현제1저자Pusan National University, Department of Materials Science and Engineering, Busan, South Korea
  2. 박상협Pusan National University, Department of Materials Science and Engineering, Busan, South Korea
  3. 박정현Pusan National University, Department of Materials Science and Engineering, Busan, South Korea
  4. 김도형Pusan National University, Department of Materials Science and Engineering, Busan, South Korea
  5. 황명원Pusan National University, Department of Materials Science and Engineering, Busan, South Korea
  6. 정원섭교신저자Pusan National University, Department of Materials Science and Engineering, Busan, South Korea

초록

Super duplex stainless steel (SDSS) has high corrosion resistance. However, welding decreases its corrosion resistance due to the segregation of its major constituent elements by excessive ferritization in the weld zone (WZ) of SDSS. Increased welding current at resistance spot welding (RSW) increased the nugget size from 5.3 mm (6.0 kA) to 5.8 mm (8.0 kA), which in turn decreased the corrosion resistance. A larger WZ decreased the active potential (Ecorr) and increased the active current density (Icorr). Welded SDSS specimens exhibited heterogeneous pitting below the pitting potential. Heat treatment for a short time at a high temperature (1200 °C) improved the corrosion resistance by modifying the volume fractions of austenite and ferrite. Heat treatment for 3 min resulted in the highest corrosion resistance, as an equal volume fraction of austenite and ferrite was achieved at this time.

키워드

Corrosion behaviorPost-weld heat treatmentResistance spot weldingSuper duplex stainless steelWelding current

식별자

Scopus EID
2-s2.0-85063998535
WoS UID
000460758200025