Improving the stability of ceramic-type lithium tantalum phosphate (LiTa2PO8) solid electrolytes in all-solid-state batteries
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q1Scopus Q1
- 저널
- JOURNAL OF ENERGY STORAGE80 · 2024
- 피인용
- Web of Science 11Scopus 10
- FWCI (Scopus)
- 0.63
- JCR IF
- JCR 2023 8.9
- ISSN
- 2352-152X
저자
- 남채영제1저자Pusan Natl Univ, Dept Mat Sci & Engn, 2 Busandaehak Ro 63 Beon Gil, Busan 46241, South Korea
- 김현진Pusan Natl Univ, Dept Mat Sci & Engn, 2 Busandaehak Ro 63 Beon Gil, Busan 46241, South Korea
- Jin, WooyoungKorea Inst Energy Res KIER, Ulsan Adv Energy Technol R&D Ctr, 25 Techno Saneop Ro 55 Beon Gil, Ulsan 44919, South Korea
- Seol, Jeong HwanKorea Inst Energy Res KIER, Ulsan Adv Energy Technol R&D Ctr, 25 Techno Saneop Ro 55 Beon Gil, Ulsan 44919, South Korea
- Kim, Tae-HeeKorea Inst Energy Res KIER, Ulsan Adv Energy Technol R&D Ctr, 25 Techno Saneop Ro 55 Beon Gil, Ulsan 44919, South Korea
- 윤석영교신저자Pusan Natl Univ, Dept Mat Sci & Engn, 2 Busandaehak Ro 63 Beon Gil, Busan 46241, South Korea
- Choi, Sinho교신저자Korea Inst Energy Res KIER, Ulsan Adv Energy Technol R&D Ctr, 25 Techno Saneop Ro 55 Beon Gil, Ulsan 44919, South Korea
초록
Solid-state battery (SSB) systems are among the most promising next-generation batteries for electronics and electric vehicles because of their high volumetric energy density, safety, nonflammability, and chemical stability, compared to lithium-ion batteries using conventional liquid electrolytes. However, SSBs have several limitations, including the reactivity of the electrode materials. Herein, we address these issues by synthesizing lithium tantalum phosphate (LTPO) solid-electrolyte disks through a cold sintering process and assembling them with a lithium manganese iron phosphate (LMFP) electrode into an all-solid-state battery. The SSB fabricated with LTPO/LMFP exhibited a high initial discharge capacity (~130 mAh/g) and capacity retention (70 % after 100 cycles) at room temperature (RT). The LTPO with an amorphous lithium-based composite in the grain boundaries has high ionic conductivity and stability at the interface of the LMFP electrodes. In addition, the LMFP cathodes with an adhesive layer infiltrating the pores of the electrode significantly improved the cyclic performance of the SSB system with an initial capacity of 125 mAh/g and capacity retention of approximately 98 % after 100 cycles at RT. The analysis and future experimental results proved that this novel material and approach can improve the electrochemical performance of rechargeable SSBs and contribute to the development of high-performance energy storage devices for various applications.
키워드
All-solid-state batteryInterface stabilityLithium tantalum phosphateSolid electrolyteLI ION CONDUCTORSCONDUCTIVITYINTERFACEISSUES
식별자
- Scopus EID
- 2-s2.0-85181777320
- WoS UID
- 001156057100001



로그인
연구물 목록으로