Fluorine-rich modification of self-extinguishable lithium-ion battery separators using cross-linking networks of chemically functionalized PVDF terpolymers for highly enhanced electrolyte affinity and thermal-mechanical stability
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q1Scopus Q1
- 저널
- JOURNAL OF MATERIALS CHEMISTRY A12(4) · pp.2011 · 2024
- 피인용
- Web of Science 18Scopus 17
- FWCI (Scopus)
- 0.88
- JCR IF
- JCR 2023 10.8
- ISSN
- 2050-7488
저자
- Park, Jaewon제1저자Pukyong Natl Univ, Dept Ind Chem, 45 Yongso Ro, Busan 48513, South Korea
- Kwon, Young JePukyong Natl Univ, Dept Ind Chem, 45 Yongso Ro, Busan 48513, South Korea
- Yun, JeongsikIncheon Natl Univ, Dept Energy & Chem Engn, 119 Acad Ro, Incheon 22012, South Korea
- Bae, Ji WooPukyong Natl Univ, Dept Ind Chem, 45 Yongso Ro, Busan 48513, South Korea
- Lee, Min JeongPukyong Natl Univ, Dept Ind Chem, 45 Yongso Ro, Busan 48513, South Korea
- Zhang, KaiyunPukyong Natl Univ, Dept Ind Chem, 45 Yongso Ro, Busan 48513, South Korea
- Kim, Se HunPukyong Natl Univ, Dept Ind Chem, 45 Yongso Ro, Busan 48513, South Korea
- Baeg, Kang-JunPukyong Natl Univ, Dept Nanotechnol Engn, 45 Yongso Ro, Busan 48513, South Korea
- 이진홍Pusan Natl Univ, Sch Chem Engn, Busan 46421, South Korea
- Cho, Kie Yong교신저자Pukyong Natl Univ, Dept Ind Chem, 45 Yongso Ro, Busan 48513, South Korea
초록
Thermal runaway is of great interest for developing high-performance Li-ion batteries (LIBs) and is accelerated by melting a separator at the elevated temperature during the battery failure. Herein, we report a facile polymeric coating method for polypropylene (PP)-based separators (PPSs) that enhances thermal, mechanical, and electrochemical performances. A conceptually designed double bond-containing polyvinylidene fluoride terpolymer (DPVDF) was coated on PPSs (DPSs) employing a simple dip-coating method, followed by a cross-linking process for DPVDF (DPSX). The modulus of DPSX increased from 49.06 MPa (PPS) to 64.29 MPa. The thermal shrinkage area of DPSX decreased by less than 10% at 140 degrees C for 30 min, whereas PPSs showed a 31.2% shrinkage. High-temperature open-circuit voltage tests (140 degrees C) showed that LiFePO4 (LFP) half-cells with PPS and DPS were short-circuited after 10 and 40 min, respectively. However, the LFP cell with DPSX showed no voltage drops even after 2 h. Furthermore, electrolyte wetting was significantly enhanced for DPSs and DPSX compared to PPSs. Moreover, electrolyte uptake was also increased from 65.25% (PPS) to 196.63% (DPSX), which is attributed to the enhanced wettability and pore structure. The long-term cycling and rate capability values of the LFP half-cells assembled with DPS and DPSX were significantly higher than those of the LFP half-cell with PPSs, which is closely related to the reduced cell resistance owing to the interfacial affinity of DPSX. Lastly, it was found that the DPVDF coating granted self-extinguishing functions to the separator. Flame tests demonstrated that DPSs and DPSX were instantly extinguished within a second and retained more than 74.89% of their weight after burning tests, while PPSs lost more than 43.46% (dried) and 59.65% (wetted) of their weight. Thermal instability of polypropylene separators (PPSs) threatens the safe battery operation. A double bond-containing polyvinylidene fluoride (DPVDF)-coated PPS (DPS) and the subsequent crosslinking (DPSX) demonstrate an instant fire extinguishing feature and high thermal stability.
키워드
POLYETHYLENE SEPARATORPOLYIMIDE SEPARATORSCOMPOSITE SEPARATORSIO2 PARTICLESCOATING LAYERPERFORMANCETHICKNESSMEMBRANESPROGRESSDESIGN
식별자
- Scopus EID
- 2-s2.0-85182152497
- WoS UID
- 001135685600001



로그인
연구물 목록으로