본문 바로가기

Influence of Blending Method on the Generation of Wear Particulate Matters and Physical Properties in TBR Tire Tread Compounds

문서 유형
연구출판물 · 학술지 논문
등재
ESCIKCI
저널 순위
KCI Q4
저널
엘라스토머 및 콤포지트58(4) · pp.161 · 2023
피인용
KCI 0
JCR IF
JCR 2022 0.8
ISSN
2092-9676

저자

  1. 송상훈제1저자부산대학교
  2. 정준환부산대학교
  3. 하진욱한국자동차연구원
  4. 박대동한국자동차연구원
  5. 류경찬부산대학교
  6. 김동혁교신저자부산대학교
  7. 황기원한국타이어
  8. 정성욱부산대학교
  9. 김원호교신저자부산대학교

초록

Because particulate matter has emerged as a major contributor to air pollution, the tire industry has conducted studies to reduce particulate matters from tires by improving tire performance. In this study, we compared the conventional blending method, in which rubber, filler, and additives are mixed simultaneously, to the Y-blending method, in which masterbatches are blended. We manufactured carbon black (CB)-filled natural rubber (NR)/butadiene rubber (BR) blend and silica- filled epoxidized NR/BR blend compounds to compare the effects of the two blending methods on the physical properties of the compounds and the amount of particulate matter generated. The Y-blending method provided uniform filler distribution in the heterogeneous rubber matrix, improved processability, and exhibited low rolling resistance. This method also improved physical properties owing to the excellent fillerrubber interaction. The results obtained from measuring the generation of particulate matter indicated that, the Y-blending method reduced PM2.5 particulate matter generation from the CB-filled and silica-filled compounds by 38% and 60%, and that of PM10 by 29% and 67%, respectively. This confirmed the excellence of the Y-blending method regarding the physical properties of truck bus radial tire tread compounds and reduced particulate matter generated.

키워드

TBR tire tread compoundY-blending methodfiller distributionwear resistancerolling resistance

식별자

KCI
ART003038730