본문 바로가기

중량부품 지지대 보강에 의한 원자력 발전소 배터리 차져의 내진한계상태 비교

Fragility Comparison of Battery Chargers for Nuclear Power Plants depending on Reinforcement of Supporting for Massive Components

문서 유형
연구출판물 · 학술지 논문
등재
KCI
저널 순위
KCI Q2
저널
한국소음진동공학회논문집33(3) · pp.264 · 2023
피인용
KCI 1
ISSN
1598-2785

저자

  1. 정영수제1저자부산대학교 지진방재연구센터
  2. 장성진부산대학교 지진방재연구센터
  3. 김성완부산대학교 지진방재센터
  4. 박준희한국원자력연구원
  5. 박동욱교신저자부산대학교 지진방재연구센터

초록

In South Korea, nuclear power plant equipments are designed and qualified according to the Nuclear Regulatory Commission (NRC) Regulatory Guide 1.60 (R.G. 1.60). However, the uniform hazard spectrum (UHS) at the nuclear site in Uljin area exhibits a higher response acceleration in the high frequency range in comparison with R.G. 1.60. In this study, a seismic limit state test considering different response spectra types was executed for battery chargers with and without reinforcement, which is a similar model to that using N.P.P. Battery charger using N.P.P. includes a massive transformer, which is normally fixed to the enclosure with brackets. Brackets should be under high seismic loads because of the transformer mass. Failure modes of the battery charger considered in this study were observed as the structural failure mode in transformer supports (bracket) and functional failure mode in major relay chattering. It seems that the reinforcement for structural failure mode can improve not only structural limit state but also reduce the chattering phenomenon under seismic conditions.

키워드

Battery ChargerElectronic CabinetSeismic AmplificationHigh Frequency MotionShaking Table Test배터리 차져전기 캐비넷지진 증폭고주기진동진동대 실험

식별자

KCI
ART002967364