Determination of forming limits of high strength sound-deadening laminated sheet
- 문서 유형
- 연구출판물 · 학술대회 발표논문
- 등재
- Scopus
- 저널 순위
- Scopus Q4
- 저널
- Journal of Physics: Conference Series1063(1) · 2018
- 피인용
- Scopus 1
- FWCI (Scopus)
- 0.54
- ISSN
- 1742-6588
저자
- 박현일제1저자Department of Mechanical Engineering, Pusan National University, Busan, South Korea
- Kim, Se-JongMaterials Deformation Department, Korea Institute of Materials Science, Gyeongnam, Changwon, South Korea
- Lee, JinwooMaterials Deformation Department, Korea Institute of Materials Science, Gyeongnam, Changwon, South Korea
- Kim, Daeyong교신저자Materials Deformation Department, Korea Institute of Materials Science, Gyeongnam, Changwon, South Korea
초록
High strength sound-deadening laminated sheet consists of high strength steel sheets and a viscoelastic polymeric adhesive with high vibrational damping characteristics. In this study, to evaluate formability of sound-deadening laminated sheet, forming limit curves (FLC) were determined. The high strength sound-deadening laminate sheet was fabricated with dual phase (DP) 590 steel sheets as outer skins and polymeric adhesive as a core by roll bonding process. The punched dome tests (Nakajima tests) were performed with varying specimen width. On the specimen prior to deformation, a stochastic pattern was applied to the surface using a white and black spray. Until the fracture occurs, the strain distribution was measured in the stereo image using digital image correlation (DIC) system. FLC of the laminated was successfully determined by capturing limit strains near fracture as well as calculating them according to the ISO standards. FLC of the laminated sheet is slightly higher than that of DP590 sheet but is not significantly different.
식별자
- Scopus EID
- 2-s2.0-85051841326



로그인
연구물 목록으로