Characteristics map of dynamic behavior of a droplet impinging onto an inclined hot surface
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q4Scopus Q2
- 저널
- JOURNAL OF VISUALIZATION26(5) · pp.1009 · 2023
- 피인용
- Web of Science 5Scopus 6
- FWCI (Scopus)
- 0.46
- JCR IF
- JCR 2022 1.7
- ISSN
- 1343-8875
저자
- 김미래제1저자Pusan Natl Univ, Rolls Royce Univ Technol Ctr, Busan 46241, South Korea
- Kim, Dong교신저자Univ Ulsan, Sch Mech Engn, Ulsan 44610, South Korea
초록
The dynamic behavior of a droplet impinging on a hot surface was examined experimentally using high-speed cameras. De-ionized water droplets with a diameter of 2.25 mm were generated through a 31G injection needle. A sapphire plate with inclination angles ranging from 0 degrees to 60 degrees was heated to 300 degrees C on a hotplate. Two high-speed cameras with frame rates of 20,000 frames per second were used to visualize the dynamic behavior of water droplets. The Weber number was varied from 5 to 123 by changing the initial height of the droplet from 40 to 210 mm. This corresponds to a normal Weber number range of 6-34 for an inclination angle of 60 degrees. The dynamic behavior of the droplet after impingement was strongly dependent on the surface temperature, inclination angle and Weber number. At lower inclination angles, micro-explosions were observed when the surface temperature was at the Leidenfrost condition. At higher inclination angles, the impinging droplet tended to recover its original spherical shape due to the vapor cushion at the Leidenfrost condition. With increasing Weber number, both maximum spreading diameter and sliding length were increased.
키워드
Droplet impingementLeidenfrost phenomenonWeber numberDynamic behaviorInclined surfaceVisualizationWATER DROPLET
식별자
- Scopus EID
- 2-s2.0-85153747878
- WoS UID
- 000980429000001



로그인
연구물 목록으로