본문 바로가기

DEVELOPING A NEW TYPES OF FIBER-REINFORCED COMPOSITES MANUFACTURING SYSTEM: MULTI-DROP FILLING PROCESS

문서 유형
연구출판물 · 학술대회 발표논문
등재
Scopus
피인용
Scopus 0
FWCI (Scopus)
0

저자

  1. 강승인제1저자School of Chemical Engineering, Pusan National University, Busandaehak-ro 63beon-gil 2, Geumjeong-gu, Busan, Republic of Korea
  2. 우정재School of Chemical Engineering, Pusan National University, Busandaehak-ro 63beon-gil 2, Geumjeong-gu, Busan, Republic of Korea
  3. 김민경School of Chemical Engineering, Pusan National University, Busandaehak-ro 63beon-gil 2, Geumjeong-gu, Busan, Republic of Korea
  4. 성동기교신저자School of Chemical Engineering, Pusan National University, Busandaehak-ro 63beon-gil 2, Geumjeong-gu, Busan, Republic of Korea

초록

We suggest a new liquid composite molding process (LCM) called the multi-drop filling process (MDF). The newly proposed MDF includes a programmable resin dosing system that allows dropping an accurate amount of resin at the pre-designated location. Carbon fiber-reinforced plastic (CFRP) with both complex geometry and simple plate shape specimens were fabricated by the suggested MDF and the vacuum-assisted resin transfer molding (VARTM). MDF's advanced impregnability and filling time were proved by comparing parameters such as tensile, compressive, flexural, short-beam strengths as well as void contents with VARTM. In the case of plate shape specimens, all parameters showed a similar level in both groups, while the void content at corner regions of the MDF fabricated complex-shaped specimen showed a significant reduction as well as cycle time decreased. Obtained results proved that the newly developed MDF has the ability to mass-produce the customized complex-shaped composite parts, overcoming conventional LCM limitations.

키워드

Carbon fibersLiquid composite moldingResin flowResin transfer molding

식별자

Scopus EID
2-s2.0-85149389640