Comparative rheology techniques for assessment of MIM titanium metal powder feedstocks
- 문서 유형
- 연구출판물 · 학술대회 발표논문
- 등재
- Scopus
- 저널 순위
- Scopus Q3
- 저널
- KEY ENGINEERING MATERIALS770 KEM · pp.195 · 2018
- 피인용
- Scopus 0
- FWCI (Scopus)
- 0
- ISSN
- 1013-9826
저자
- Ewart, Paul D.제1저자교신저자Centre for Engineering and Industrial Design, Waikato Institute of Technology, Hamilton, New Zealand
- Verbeek, Casparus J.Chemical and Biological Engineering, School of Engineering, University of Waikato, Hamilton, New Zealand
- 안석영School of Mechanical Engineering, Pusan National University, Busan, South Korea
초록
In this work standard industrial processing equipment, the torque mixer and twin screw extruder, are used to measure the melt flow of several titanium metal powder feedstocks. The study was to determine whether test data from specialised rheology equipment might be reproduced with standard processing equipment used by the MIM industry. Considering the wide range of flow defects possible with MIM there is a valid assumption that flow behaviour measurement will be better represented by a number of processes, especially those most representative of the injection moulding process. In this study process data was collected and analysed based on mixing torque, screw work, specific mechanical energy and viscosity. Viscosity was further calculated relative to (L/D) ratio and strain rates during extrusion. Subsequently the data was compared with viscosity values from a capillary rheometer both without, and with, account for end effects and slip. The results showed that all the techniques provide similar ranking for the feedstocks with regard to melt flow during processing. The results also showed an inversion of the ranking where the shear rate increased from (1000 to 5000) s-1 as a result of shear sensitivity. The agreement of results from the different techniques clearly show that conventional processing equipment may provide valid feedstock assessment. The results if not definitive will provide good comparative measure where upper and lower bounds can be determined.
키워드
식별자
- Scopus EID
- 2-s2.0-85047855760



로그인
연구물 목록으로