본문 바로가기

적층제조 연속섬유강화 고분자 복합재료의 물성 예측

Prediction of the Mechanical Properties of Additively Manufactured Continuous Fiber-Reinforced Composites

문서 유형
연구출판물 · 학술지 논문
등재
KCI
저널 순위
KCI Q3
저널
소성∙가공32(1) · pp.28 · 2023
피인용
KCI 0
ISSN
1225-696X

저자

  1. 파르비즈 카할제1저자부산대학교
  2. H. Ghorbani-Menghari부산대학교
  3. 김형태부산대학교
  4. 김지훈교신저자부산대학교

초록

In this research, a representative volume element (RVE)-based FE Model is presented to estimate the mechanical properties of additively manufactured continuous fiber-reinforced composites with different fiber orientations. To construct the model, an ABAQUS Python script has been implemented to produce matrix and fiber in the desired orientations at the RVE. A script has also been developed to apply the periodic boundary conditions to the RVE. Experimental tests were conducted to validate the numerical models. Tensile specimens with the fiber directions aligned in the 0, 45, and 90 degrees to the loading direction were manufactured using a continuous fiber 3D printer and tensile tests were performed in the three directions. Tensile tests were also simulated using the RVE models. The predicted Young’s moduli compared well with the measurements: the Young’s modulus prediction accuracy values were 83.73, 97.70, and 92.92 percent for the specimens in the 0, 45, and 90 degrees, respectively. The proposed method with periodic boundary conditions precisely evaluated the elastic properties of additively manufactured continuous fiber-reinforced composites with complex microstructures.

키워드

Additive manufacturingfiber reinforced compositesrepresentative volume elementPeriodic boundary conditionmechanical propertiesmicromechanical analysis.

식별자

KCI
ART002929674