Vaporization Modeling and Experimental Verification During Laser Beam Welding for 24Mn Steel
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- KCI
- 저널 순위
- KCI Q1
- 저널
- 대한용접접합학회지40(6) · pp.457 · 2022
- 피인용
- KCI 4
- ISSN
- 2466-2232
저자
초록
Vaporization modeling and experimental verification of the alloying elements that occurred during laser beam welding (LBW) of high-manganese steel were conducted. LBW using a disk laser and bead-on-plate testing was performed. Through modeling calculations at temperatures higher than 2800 K, the vapor pressure of Mn was found to be significantly larger than that of the other alloying elements. Furthermore, the vaporization flux of Mn was at least 10 times larger than that of the other alloying elements. The composition of the laser weldment was confirmed through electron probe microanalysis (EPMA), and a 1.8-wt% Mn reduction was observed in the laser weldment compared with the base metal composition. The composition of the other alloying elements, such as Fe, Cr, Si, and C, in the laser weldment was similar to that in the base metal.
키워드
High manganese steelVaporizationLaser beam weldingModelingEPMA
식별자
- KCI
- ART002918900



로그인
연구물 목록으로