본문 바로가기

타이타늄 스크랩을 이용한 수용성 절삭유 처리 특성

Characteristics of Soluble Cutting Fluid Treatment Using Titanium Scraps

문서 유형
연구출판물 · 학술지 논문
등재
KCI
저널 순위
KCI Q4
피인용
KCI 0
ISSN
1225-7192

저자

  1. 박인수제1저자부산대학교
  2. 김고은교신저자부산대학교 바이오환경에너지학과
  3. 장성호부산대학교
  4. 유시현부산대학교 바이오환경에너지학과
  5. 이원기부경대학교
  6. 정병길동의대학교
  7. 이재용경운대학교

초록

In this study, titanium scraps were used as bipolar packed-bed electrodes for the electrochemical treatment of soluble cutting fluid (SCF), and the removal efficiency of CODCr from the SCF and oil from the titanium scraps were analyzed in accordance with the scrap density, current density, electrolyte type and concentration. The removal efficiency of CODCr after 60 min was 76.0%, 73.8%, 85.0%, and 84.2% for a scrap density of 0, 10, 20, and 30 g/L, respectively, while the removal efficiency for oil was 75.8%, 78.8%, and 66.8% for a scrap density of 10, 20, and 30 g/L, respectively. In addition, the removal efficiency of CODCr after 60 min was 85.0%, 89.1%, and 94.4% and that of oil was 78.8%, 86.3%, and 89.3% for a current density 40, 60, and 80 A/m2, respectively. Finally, after testing the system with no electrolyte or with either Na2SO4 or NaCl (5-10 mM), the highest removal efficiency of CODCr and oil was 94.4%, and 89.3%, respectively, with no electrolyte and a current density of 80 A/m2. In conclusion, the removal of efficiency of CODCr and oil was maximized with a scrap density of 20 g/L, a current density of 80 A/m2, and no electrolyte.

키워드

타이타늄 스크랩수용성 절삭유충진복극전기화학적 처리알루미늄 전극Titanium scrapsSoluble cutting fluidBipolar packed-bed electrodeElectrochemical treatmentAl electrode

식별자

KCI
ART002907432