본문 바로가기

Synthesis and characterization of thermally cross-linkable poly (iminoarylene)-based hole injection layer for solution-processed organic light-emitting diodes

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q1Scopus Q1
피인용
Web of Science 9Scopus 9
FWCI (Scopus)
0.45
JCR IF
JCR 2022 15.1
ISSN
1385-8947

저자

  1. 곽선이제1저자Pusan Natl Univ, Chem Inst Funct Mat, Busan 46241, South Korea
  2. 박혜정Pusan Natl Univ, Chem Inst Funct Mat, Busan 46241, South Korea
  3. 장재호Pusan Natl Univ, Chem Inst Funct Mat, Busan 46241, South Korea
  4. 박정용Pusan Natl Univ, Chem Inst Funct Mat, Busan 46241, South Korea
  5. Park, Jong MokKorea Res Inst Chem Technol, Res Ctr Adv Specialty Chem, Ulsan 44412, South Korea
  6. Lee, JihoonKorea Natl Univ Transportat, Dept Polymer Sci & Engn, Chungju 27469, South Korea
  7. 황도훈교신저자Pusan Natl Univ, Chem Inst Funct Mat, Busan 46241, South Korea

초록

© 2022 Elsevier B.V.A cross-linkable poly(iminoarylene), poly[(9,9-dioctyl-N-(p-tolyl)-9H-fluoren-2-amine)–co-(9,9-bis(4-(bicyclo[4.2.0]octa-1(6),2,4-trien-7-yloxy)phenyl)-N-(p-tolyl)-9H-fluoren-2-amine)] [poly(FA-co-BFA)], was synthesized as a hole injection layer (HIL) for solution-processed organic light-emitting diodes (OLEDs). Poly(FA90-co-BFA10) containing 10 mol% of benzocyclobutene (BCB) which is a thermally curable functional group was used in this study. The highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy levels of poly(FA90-co-BFA10) were measured to be −5.14 and −2.31 eV, respectively. After heating at 150 °C for 40 min, the spin-cast poly(FA90-co-BFA10) film became completely crosslinked without requiring the use of additional initiators. The crosslinked thin film showed good film-forming properties and excellent solvent resistance (up to 99 %). A photo-crosslinked poly[bis(4-butypheny)-bis(phenyl)benzidine] (poly-TPD) was used as the hole-transporting layer (HTL) on top of the crosslinked poly(FA90-co-BFA10). Finally, a solution-processed red phosphorescent OLED device with the structure of indium tin oxide/poly(FA90-co-BFA10)/poly-TPD/emissive layer/TPBi/LiF/Al was fabricated and characterized. The device showed a low turn-on voltage (Von) of 3.5 V, a reasonably high current efficiency (CE) of 16.6 cd/A, and an external quantum efficiency (EQE) of 12.5 %, which are better than those of the corresponding reference device using PEDOT:PSS as the HIL. Moreover, the device fabricated using the poly(FA90-co-BFA10) HIL demonstrated a longer lifetime than that fabricated using PEDOT:PSS.

키워드

BenzocyclobuteneHole-injection layerOrganic light-emitting diodeThermal crosslinkingTRANSPORTING MATERIALSHIGHLY EFFICIENTARYLAMINESLINKING

식별자

Scopus EID
2-s2.0-85141265789
WoS UID
000918929700004