Fabrication of Complex Three-Dimensional Structures of Mica through Digital Light Processing-Based Additive Manufacturing
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- ESCIScopus
- 저널 순위
- Scopus Q2
- 저널
- CERAMICS-SWITZERLAND5(3) · pp.562 · 2022
- 피인용
- Scopus 11
- FWCI (Scopus)
- 0.51
- ISSN
- 2571-6131
저자
- Zhang, Sinuo제1저자Advanced Materials Engineering, University of Science and Technology (UST), Daejeon, 34113, Korea
- Sutejo, Imam AkbarAdvanced Materials Engineering, University of Science and Technology (UST), Daejeon, 34113, Korea
- 김지환School of Materials Science and Engineering, Pusan National University, Busan 46241, Korea
- Choi, Yeong-JinDepartment of Advanced Biomaterials Research, Ceramics Materials Division, Korea Institute of Materials Science (KIMS), Changwon-si, 51508, Korea
- Gal, Chang WooDepartment of Advanced Biomaterials Research, Ceramics Materials Division, Korea Institute of Materials Science (KIMS), Changwon-si, 51508, Korea
- Yun, Hui-Suk교신저자Advanced Materials Engineering, University of Science and Technology (UST), Daejeon, 34113, Korea
초록
© 2022 by the authors.Mica is a group of clay minerals that are frequently used to fabricate electrical and thermal insulators and as adsorbents for the treatment of cationic pollutants. However, conventional subtractive manufacturing has the drawback of poor three-dimensional (3D) shape control, which limits its application. In this study, we propose digital light processing (DLP)-based additive manufacturing (AM) as one of the most effective ways to address this drawback. Two major challenges for the ceramic DLP process are the production of a homogeneous and stable slurry with the required rheological properties and the maintenance of printing precision. The mica green body was fabricated using a 53 vol.% solid loading slurry through DLP, which exhibited good dimensional resolution under an exposure energy dose of 10 mJ/cm2. The precise, complex 3D structure was maintained without any defects after debinding and sintering at 1000 °C. The use of ceramic AM to overcome the shape-control limitations of mica demonstrated in this study offers great potential for expanding the applications of mica.
키워드
additive manufacturingclay mineralsdigital light processingmica
식별자
- Scopus EID
- 2-s2.0-85138712808



로그인
연구물 목록으로