Novel Approach toward the Forming Process of CFRP Reinforcement with a Hot Stamped Part by Prepreg Compression Molding
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q1Scopus Q2
- 저널
- MATERIALS15(14) · 2022
- 피인용
- Web of Science 14Scopus 15
- FWCI (Scopus)
- 0.86
- JCR IF
- JCR 2021 3.748
- ISSN
- 1996-1944
저자
- 김재홍제1저자Pusan Natl Univ, ERC Innovat Technol Adv Forming, Busan 46241, South Korea
- 정용훈Pusan Natl Univ, ERC Innovat Technol Adv Forming, Busan 46241, South Korea
- Lambiase, FrancescoUniv LAquila, Dept Ind & Informat Engn & Econ, I-67100 Laquila, Italy
- 문영훈Pusan Natl Univ, Sch Mech Engn, Busan 46241, South Korea
- 고대철교신저자Pusan Natl Univ, Dept Nanomechatron Engn, Busan 46241, South Korea
초록
© 2022 by the authors. Licensee MDPI, Basel, Switzerland.The use of carbon fiber-reinforced plastics (CFRP) is markedly increasing, particularly for the manufacturing of automotive parts, to achieve better mechanical properties and a light weight. However, it is difficult to manufacture multi-material products because of the problems due to the adhesive between CFRP and steel. The prepreg compression molding (PCM) of laminated CFRP can reduce the production time and increase the flexibility of the manufacturing process. In this study, a new manufacturing process is proposed for CFRP reinforcement on a hot stamped B-pillar using PCM. A finite element (FE) simulation of the hot stamping process is conducted to predict the dimensions of the B-pillar. The feasibility of PCM manufacturing is explored by the simulation of the thermoforming of a CFRP set on a shaped B-pillar. The temperature conditions of the CFRP and B-pillar for the PCM are determined by considering the heat transfer between the CFRP and steel. Finally, the PCM of the B-pillar consisting of steel and CFRP was performed to compare with the analytical results for verification. The evaluation of the B-pillar was conducted by the observation of the cross-section for the B-pillar and interlayer by scanning electron microscopy (SEM). As a result, a steel/CFRP B-pillar assembly could be efficiently manufactured using the PCM process without an additional adhesive process.
키워드
B-pillarcarbon fiber reinforcement plastic (CFRP)hot stampingprepreg compression molding (PCM)thermoforming analysisCARBONDESIGN
식별자
- Scopus EID
- 2-s2.0-85134009916
- WoS UID
- 000832192100001



로그인
연구물 목록으로