Thermal and mechanical properties of rigid polyurethane foam with kevlar aramid pulp
- 문서 유형
- 연구출판물 · 학술대회 발표논문
- 등재
- Scopus
- 저널 순위
- Scopus Q4
- 저널
- MATERIALS SCIENCE FORUM951 MSF · pp.89 · 2019
- 피인용
- Scopus 1
- FWCI (Scopus)
- 0.74
- ISSN
- 0255-5476
저자
- 오종호제1저자Pusan National University, 2, Busandaehak-ro 63beon-gil, Geumjeong-gu, Busan, Korea
- 배진호Pusan National University, 2, Busandaehak-ro 63beon-gil, Geumjeong-gu, Busan, Korea
- 김정현Pusan National University, 2, Busandaehak-ro 63beon-gil, Geumjeong-gu, Busan, Korea
- 김슬기Pusan National University, 2, Busandaehak-ro 63beon-gil, Geumjeong-gu, Busan, Korea
- 이제명Pusan National University, 2, Busandaehak-ro 63beon-gil, Geumjeong-gu, Busan, Korea
초록
© 2019 Trans Tech Publications Ltd, Switzerland.Kevlar-polyurethane foam (PUF) was manufactured by adding Kevlar pulp, which has excellent mechanical strength and thermal performance, to PUF for the purpose of improving the performance of existing PUF. The mechanical strength of Kevlar-PUF was evaluated for each weight ratio (0.2, 0.4, 0.6, 0.8, and 1.0 wt.%) of fiber, as the performance of PUF was improved by the addition of Kevlar fiber. Compression tests were carried out at four temperatures (20, −50, −110, and −163 °C) in consideration of the service environment, where Kevlar-PUF is used as insulation of LNG storage systems. The fracture characteristics of the compressed specimen are also analyzed. The thermal conductivity of the foam at room temperature (20 °C) and low temperature (−20 °C) is measured according to the weight ratios. The addition of a certain amount of Kevlar fibers increases the compression resistance of PUF and improves the properties of the material.
키워드
Kevlar pulpLiquefied Natural GasMechanical PropertiesPolyurethane Foam
식별자
- Scopus EID
- 2-s2.0-85071623912



로그인
연구물 목록으로