본문 바로가기

Lightweight injection mold using additively manufactured Ti-6Al-4V lattice structures

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q2Scopus Q1
저널
JOURNAL OF MANUFACTURING PROCESSES79 · pp.759 · 2022
피인용
Web of Science 44Scopus 46
FWCI (Scopus)
2.06
JCR IF
JCR 2021 5.684
ISSN
1526-6125

저자

  1. Park, Seong Je제1저자Korea Inst Ind Technol, Adv Joining& Addit Mfg R&D Dept, 113-58,Seohaean ro, Shihung 15014, Gyeonggi, South Korea
  2. Lee, Jun HakKorea Inst Ind Technol, Adv Joining& Addit Mfg R&D Dept, 113-58,Seohaean ro, Shihung 15014, Gyeonggi, South Korea
  3. 양정호Pusan Natl Univ, Sch Mech Engn, 2 Busandaehak ro 63 beon gil, Busan 46241, South Korea
  4. Heogh, WoongbeomKorea Inst Ind Technol, Adv Joining& Addit Mfg R&D Dept, 113-58,Seohaean ro, Shihung 15014, Gyeonggi, South Korea
  5. Kang, DongseokKorea Inst Ind Technol, Adv Joining& Addit Mfg R&D Dept, 113-58,Seohaean ro, Shihung 15014, Gyeonggi, South Korea
  6. Yeon, Si MoKorea Inst Ind Technol, Adv Joining& Addit Mfg R&D Dept, 113-58,Seohaean ro, Shihung 15014, Gyeonggi, South Korea
  7. Kim, Sang HoonKorea Inst Ind Technol, Adv Joining& Addit Mfg R&D Dept, 113-58,Seohaean ro, Shihung 15014, Gyeonggi, South Korea
  8. Hong, SukjoonHanyang Univ, Dept Mech Engn, Opt Nanoproc Lab, 55 Hanyangdaehak ro, Ansan 15588, Gyeonggi, South Korea
  9. Son, YongKorea Inst Ind Technol, Adv Joining& Addit Mfg R&D Dept, 113-58,Seohaean ro, Shihung 15014, Gyeonggi, South Korea
  10. Park, Jiyong교신저자Korea Inst Ind Technol, Adv Joining& Addit Mfg R&D Dept, 113-58,Seohaean ro, Shihung 15014, Gyeonggi, South Korea

초록

Injection mold requires a large weight, significant cost of material, safety management, and installation of auxiliary facilities. In this study, we realized a lightweight injection mold consisting of lattice structures through the additive manufacturing (AM) technology for overcoming these limitations. A compression test was conducted to understand the intrinsic mechanical properties of lattice structures according to density. Moreover, the external force applied to a mold using computer-aided engineering (CAE) was confirmed. Based on the results of the compression test of the lattice structure and CAE analysis for the mold, a lightweight injection mold was designed and fabricated to facilitate design for additive manufacturing. Furthermore, the lightweight injection mold was assembled into the injection machine and the injection test was performed. The weight and amount of material of the mold were reduced by ~79%, and the injection molding of 400 shots was successful using polyvinyl chloride (PVC) without damaging the mold.

키워드

Lightweight injection moldLattice structureDesign for additive manufacturing (DfAM)TITANIUM-ALLOYPERFORMANCEBEHAVIOROPTIMIZATIONDESIGN

식별자

Scopus EID
2-s2.0-85130575252
WoS UID
000808992700004