본문 바로가기

Friction and wear study on patterned bearing steel using a milling machine

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q2Scopus Q2
저널
MODERN PHYSICS LETTERS B36(16) · 2022
피인용
Web of Science 0Scopus 0
FWCI (Scopus)
0
JCR IF
JCR 2021 1.948
ISSN
0217-9849

저자

  1. 장태환제1저자Pusan Natl Univ, Dept Nanomechatron Engn, Busan 46241, South Korea
  2. 권진욱Pusan Natl Univ, Dept Nanomechatron Engn, Busan 46241, South Korea
  3. 김민수Pusan Natl Univ, Dept Nanomechatron Engn, Busan 46241, South Korea
  4. 김태규교신저자Pusan Natl Univ, Dept Nanomechatron Engn, Busan 46241, South Korea
  5. 배문기Pusan Natl Univ, Dept Nano Fus Technol, Busan 46241, South Korea

초록

© 2022 World Scientific Publishing Company.Bearings, which are widely used in the industry, require high-energy efficiency and durability, and research toward frictional wear improvement is in progress. In this study, micropatterns were fabricated on the surface of an STB2 bearing steel. Three types of line-shaped micropatterns with intervals of 40, 80, and 150 μm were processed using a milling machine. In addition, the friction efficiency was assessed by measuring the friction coefficient of a bare sample with a diamond-like carbon (DLC) thin film, which has excellent friction efficiency. The friction wear efficiency was further analyzed by comparing the change in friction coefficient and the wear area as a function of the pattern interval. As a result of the wear test, the STB2 specimen to which the pattern was applied showed a difference in the friction coefficient according to the pattern pitch, and the lowest coefficient of friction was shown at 40 μm with the smallest pattern pitch, which confirmed that the distance between the pattern pitches affected the friction characteristics.

키워드

bearingmicro patternSTB2tribology test

식별자

Scopus EID
2-s2.0-85129106765
WoS UID
000823545100001