본문 바로가기

Release characteristics of a high-hardness DLC coating on an aspherical glass lens mold

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q2Scopus Q2
저널
MODERN PHYSICS LETTERS B36(17) · 2022
피인용
Web of Science 1Scopus 1
FWCI (Scopus)
0.1
JCR IF
JCR 2021 1.948
ISSN
0217-9849

저자

  1. 김정완제1저자Pusan Natl Univ, Dept Nano Fus Technol, Busan 46241, South Korea
  2. 김태규교신저자Pusan Natl Univ, Dept Nanomechatron Engn, Busan 46241, South Korea

초록

© 2022 World Scientific Publishing Company.In this paper, we investigated the changes in the shape precision of a diamond-like carbon (DLC)-coated surface of an aspherical glass lens mold. The press molding process of the experiment involved placing a bulk material made of glass in an ultra-precision mold and applying cylinder pressure at a high temperature. Thermally stable tungsten carbide was used as the mold material. DTM grinding with a resolution of 0.1 μm was performed to precisely process the tungsten carbide aspherical lens mold. HiPIMS-DLC and ta-C DLC coatings having excellent anti-stiction and hardness were applied on the polished mold. The hardness of the thin film was measured using nanoindentation. For the composition of the DLC, the D/G peak values were detected through Raman spectroscopy. Furthermore, the friction coefficient of the DLC thin film was measured using a tribology tester, and the friction coefficients of HiPIMS-DLC and ta-C were 0.018 and 0.014. Using FTS measurements, we confirmed that the precision of the aspherical lens shape (Peak to Valley) of the aspherical lens was 1.5 μm and 0.5 μm, respectively.

키워드

Aspherical lensdiamond-like carbonglass mold

식별자

Scopus EID
2-s2.0-85129079724
WoS UID
000823735700005