본문 바로가기

Development of efficient methodology for assessing effects of side-window rubber seals on automotive interior noise due to external flow disturbance

문서 유형
연구출판물 · 학술대회 발표논문
등재
ESCIScopus
저널 순위
Scopus Q2
피인용
Scopus 0
FWCI (Scopus)
0
ISSN
2631-6331

저자

  1. 이상헌제1저자School of Mechanical Engineering, Pusan National University, Busan 46241, Republic of Korea
  2. 이송준School of Mechanical Engineering, Pusan National University, Busan 46241, Republic of Korea
  3. 정철웅School of Mechanical Engineering, Pusan National University, Busan 46241, Republic of Korea
  4. Kwon, HyerinDRB Holding co., Ltd. 39, Sanmakgongdan buk 2-gil, Yangsan-si, Gyeongsangnam-do, 50567, Republic of Korea
  5. Seo, ChangmanDRB Holding co., Ltd. 39, Sanmakgongdan buk 2-gil, Yangsan-si, Gyeongsangnam-do, 50567, Republic of Korea

초록

© INTER-NOISE 2021 .All right reserved.Nowadays, the rapid increase in market share of electric vehicles dramatically changes the main noise sources of vehicles from the traditional combustion engine noise into so-called wind noise, which is generated by the interaction of external flow with a vehicle body. The cabin interior noise of automobiles, which is one of the most important factors affecting customer's choice, is also dominantly caused by wind noise, especially at high cruising speeds. The transmission of external flow disturbance into the cabin interior is physically understood by three sequential steps: external flow disturbance causing compressible and incompressible fluctuating surface pressure fields, window vibration due to surface pressure fields, the acoustic response of interior cabin due to window vibration. To predict the performance of automotive wind noise insulation properly in a design stage, these three mechanisms must be accurately modeled. In this study, systematic experimental and numerical methods are developed to assess wind noise insulation performance of automotive side-window rubber seals in a design stage. First, the simplified automotive cabin model (SACM) consisting of a real front side door with a side window and a cabin room is constructed to test the wind noise insulation performance of the automotive side window with rubber seals for external flow disturbance. The inner wall surface of the SACM is covered with sound-absorption material to block out external noise and to reveal acoustic property similar to that of a real car interior. Jet flow is used to generate external flow disturbance forcing window vibration. The pressure signal due to jet flow is measured inside and outside the SACM by using microphones. The difference between the two signals is used as sound insulation performance criteria, so-called the insertion loss (IL) of the side window with the rubber seals. Second, the numerical methodology is developed to predict the IL of the rubber seals. The surface pressure field on the side window due to jet flow is predicted by using the high-accurate Lattice Boltzmann Method. The predicted surface pressure fluctuations are applied as input load for computing side-window vibration. To account for the nonlinear dynamic behavior of the rubber seals, the nonlinear spring elements are used as the boundary conditions of the side window. The interior sound is then computed by using the calculated window vibration as input. The acoustic impedance of the inner wall is modeled by measuring the reverberation time of the cabin. The validity of numerical methods is confirmed by comparing the predicted results with the measured ones. To highlight the ability of the present methods as a design tool, further calculations are carried out for pad-added rubber seals with more stiffness than normal rubber seals.

식별자

Scopus EID
2-s2.0-85117386327