크랭크축의 미세속도변화를 이용한 선박엔진의 착화불량 상태 감시
Monitoring of Misfiring Status of Ship Engines Using Minute Speed Changes in the Crankshaft
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- KCIScopus
- 저널 순위
- KCI Q4
- 저널
- 센서학회지31(1) · pp.51 · 2022
- 피인용
- Scopus 1KCI 1
- FWCI (Scopus)
- 0.09
- ISSN
- 1225-5475
저자
초록
In this study an efficient method for detecting and monitoring engine misfiring, focusing on minute speed changes in the crankshaft is proposed., Its validity is verified using various misfiring cases. Typically, the crankshaft speed fluctuates around the normal value depending on the engine misfiring status. Even a minute speed change in the crankshaft can be estimated by measuring the rotation time of each tooth of the 118-tooth flywheel attached to the crankshaft with a 2-MHz timer. Therefore, a speed pattern for an in-line six-cylinder engine consists of 236 tooth rotation speeds corresponding to the two rotations of the crankshaft, in which all the cylinders complete four-stroke cycle. FFT analysis can reduce the number of components of a speed pattern from 236 to just four major components: – fundamental frequency_(f), 2f, 3f, 6f., – This makes the comparison of the misfiring cases simpler and faster. In the experiment, five engine status cases (one normal firing and, four misfiring cases) were simulated. While the 6f component was the largest for the normal case, the f component increased as misfiring occurred one, two apart, and two consecutive times. The 3D FFT pattern comprising the ratio of f, 2f, and 3f, 6f showed that the distance between the misfiring and normal states was larger.
키워드
MisfiringMornitoringSpeed change of crankshaftFlywheel toothShip engineFFT(Fast Fourier Transform) Pattern
식별자
- Scopus EID
- 2-s2.0-85166905206
- KCI
- ART002809552



로그인
연구물 목록으로