Transparent film heater based on a microgrid-patterned metal nanowire network prepared by using the bilayer lift-off technique
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- KCISCIEScopus
- 저널 순위
- JCR Q4Scopus Q3KCI Q4
- 저널
- JOURNAL OF THE KOREAN PHYSICAL SOCIETY80(5) · pp.404 · 2022
- 피인용
- Web of Science 4Scopus 4KCI 1
- FWCI (Scopus)
- 0.28
- JCR IF
- JCR 2021 0.657
- ISSN
- 0374-4884
저자
초록
In this work, a bilayer lift-off process was combined with a spray coating technique to fabricate highly flexible and transparent heaters based on silver nanowire (AgNW) microgrid (AMG) structures. The unique architecture of the bilayer polymer mold with a sufficient undercut enabled the precise, reproducible fabrication of MG made of AgNWs with a high aspect ratio. The resulting AMG exhibited well-balanced optoelectronic properties: a low sheet resistance (6 +/- 0.4 Omega/sq) and a high optical transmittance (71.8 +/- 3.9% at a 550 nm wavelength). The AMG heater showed an excellent electrothermal performance: a low-voltage operation (51.4 +/- 2 degrees C at 2 V) and high thermal resistance (similar to 398 degrees C cm(2)/W). The mechanically flexible heater was successfully attached to the wrist region, and its Joule heating performance could be maintained stably and uniformly, even under dynamic wrist bending motions.
키워드
Wearable heaterSilver nanowireMicrogridBilayer lift-offMicro-patterningSILVER-NANOWIRESTRETCHABLE HEATERSCONDUCTIVE POLYMERWEARABLE HEATERSFABRICATIONELECTRODESCOMPOSITESMART
식별자
- Scopus EID
- 2-s2.0-85123285406
- WoS UID
- 000745374000007
- KCI
- ART002820130



로그인
연구물 목록으로