본문 바로가기

Prediction of the ultimate strength of notched and unnotched im7/977-3 laminated composites using a micromechanics approach

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q1Scopus Q1
저널
POLYMERS13(20) · 2021
피인용
Web of Science 6Scopus 9
FWCI (Scopus)
0.39
JCR IF
JCR 2020 4.329
ISSN
2073-4360

저자

  1. Masud, Manzar제1저자Computational Mechanics Group, Department of Mechanical Engineering, School of Mechanical and Manufacturing Engineering (SMME), National University of Sciences and Technology (NUST), H-12, Islamabad, 44000, Pakistan;
  2. Al Kharusi, Moosa S. M.교신저자Department of Mechanical and Industrial Engineering, College of Engineering, Sultan Qaboos University, 123 Al Khoud, Muscat, 112, Oman
  3. 알리 무함마드 우메르Department of Unmanned Vehicle Engineering, Sejong University, Seoul, 05006, Korea;
  4. Mubashar, Aamir교신저자Computational Mechanics Group, Department of Mechanical Engineering, School of Mechanical and Manufacturing Engineering (SMME), National University of Sciences and Technology (NUST), H-12, Islamabad, 44000, Pakistan;
  5. Hussain, Shaik Javeed교신저자Department of Electrical and Electronics, Global College of Engineering and Technology, Muscat, 112, Oman
  6. Tariq, AdnanDepartment of Mechanical Engineering, University of Wah, Wah Cantt, 47040, Pakistan;
  7. Rehman, Gulfam UlDepartment of Mechanical Engineering, University of Wah, Wah Cantt, 47040, Pakistan;
  8. Akhtar, Mahmood HassanDepartment of Chemistry, National University of Technology (NUTech), Islamabad, 44000, Pakistan;
  9. 자비드 샤마Department of Mathematics, Pusan National University, Busan, 46241, Korea;

초록

© 2021 by the authors. Licensee MDPI, Basel, Switzerland.This paper proposes a multi-scale analysis technique based on the micromechanics of failure (MMF) to predict and investigate the damage progression and ultimate strength at failure of laminated composites. A lamina’s representative volume element (RVE) is developed to predict and calculate constituent stresses. Damages that occurred in the constituents are calculated using separate failure criteria for both fiber and matrix. Subsequently, the volume-based damage homogenization technique is utilized to prevent the localization of damage throughout the total matrix zone. The proposed multiscale analysis procedure is then used to investigate the notched and unnotched behavior of three multi-directional composite layups, [30, 60, 90, −60, 30]2s, [0, 45, 90, −45]2s, and [60, 0, −60]3s, subjected to static tension and compression loading. The specimen is fabricated from unidirectionally reinforced composite (IM7/977-3). The prediction of ultimate strength at failure and equivalent stiffness are then benchmarked against the experimental test data. The comparative analysis with various failure models is also carried out to validate the proposed model. MMF demonstrated the capability to correctly predict the ultimate strength at failure for a range of multidirectional composites laminates under tensile and compressive load. The numerically predicted findings revealed a good agreement with the experimental test data. Out of the three investigated composite layups, the simulated results for the quasi-isotropic [0, 45, 90, −45]2S layup agreed extremely well with the experimental results with all the percentage errors within 10% of the measured failure loads.

키워드

Composite laminatesIM7/977-3Micromechanics of failureMultiscale simulationUltimate strength

식별자

Scopus EID
2-s2.0-85117217498
WoS UID
000715142300001