Design of composite layer and liner for structure safety of hydrogen pressure vessel (type 4)
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- KCISCIEScopus
- 저널 순위
- JCR Q3Scopus Q2KCI Q2
- 저널
- JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY35(8) · pp.3507 · 2021
- 피인용
- Web of Science 51Scopus 55KCI 4
- FWCI (Scopus)
- 1.82
- JCR IF
- JCR 2020 1.734
- ISSN
- 1738-494X
저자
초록
© 2021, The Korean Society of Mechanical Engineers and Springer-Verlag GmbH Germany, part of Springer Nature.Due to the problems of fossil fuel exhaustion and environmental pollution, the use of hydrogen fuel has been increasing gradually, so there is also need of commercialization of hydrogen fuel cell vehicle. In order to increase its fuel efficiency, light-weightning and structural design, which are to optimize thickness and shape of the pressure vessel (end closure and boss) and winding angle of composite, have been required. This study has carried out as follows to obtain structural safety of hydrogen pressure vessel (type 4) under working pressure (700 bar). Plastic liner was designed using dome shape with isotensoid curve and spherical shape not to slip in the dome region while filament winding. After calculating the initial thickness of composite by netting theory, the composite thickness in both cylinder and dome parts to satisfy structural safety were obtained by FEM, changing the thicknesses calculated from theory. Also, optimal design of aluminium boss shape was performed using the response surface method to achieve light-weightning and increase of inner capacity. Based on the above results, structural safety of the optimal hydrogen pressure vessel (type 4) with the composite layer and boss shape finally determined was verified through FEA.
키워드
CompositeHydrogen pressure vessel (type 4)IsotensoidNetting theoryFAILURE ANALYSISSTORAGEOPTIMIZATION
식별자
- Scopus EID
- 2-s2.0-85111133904
- WoS UID
- 000678080500033
- KCI
- ART002743500



로그인
연구물 목록으로