본문 바로가기

Deformation Analysis of Roll Mold for Nano-flexible Devices

문서 유형
연구출판물 · 학술지 논문
등재
KCI
저널 순위
KCI Q2
저널
마이크로전자 및 패키징학회지28(4) · pp.47 · 2021
피인용
KCI 0
ISSN
1226-9360

저자

  1. 칼리 크 아민제1저자부산대학교
  2. 우사마 타히얼부산대학교
  3. 정명영교신저자부산대학교

초록

Nanoimprint lithography (NIL) has revolutionized the fabrications of electronics, photonics, optical and biological devices. Among all the NIL processes, roll-to-roll nanoimprinting is regarded best for having the attributes of low cost, continuous, simple, and energy-efficient process for nanoscale device fabrication. However, large-area printing is limited by the master mold deformation. In this study, a finite element model (FEM) has been constructed to assess the deformation of the roll mold adhesively wrapped on the carbon fiber reinforced material (CFRP) base roll. This study also optimizes the deformations in the metallic roll mold with respect to nip-forces applied in the printing process of nano-fabrication on large scale. The numerical simulations were also conducted to evaluate the deflection in roll mold assembly due to gravity. The results have shown decreasing trend of the deformation with decreasing nip-force. Also, pressure uniformity of about 40% has been optimized by using the current numerical model along with an acceptable deflection value in the vertical axis due to gravity.

키워드

Nanoimprint lithography (NIL)Roll-to-roll processCarbon fiber reinforced polymer (CFRP)Simulation

식별자

KCI
ART002799104