Enhanced Adhesion Strength of Pt/gamma-Al2O3 Catalysts on STS-444 Substrate via gamma-Al2O3 Intermediate Layer Formation: Application for CO and C3H6 Oxidation
Enhanced adhesion strength of pt/γ-al2o3 catalysts on sts-444 substrate via γ-al2o3 intermediate layer formation: Application for co and c3h6 oxidation
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q2Scopus Q1
- 저널
- CATALYSTS12(1) · 2022
- 피인용
- Web of Science 1Scopus 1
- FWCI (Scopus)
- 0.06
- JCR IF
- JCR 2021 4.501
- ISSN
- 2073-4344
저자
- 류승희제1저자Pusan Natl Univ, Grad Dept Chem Mat, Busan 46241, South Korea
- Hwang, Cheol HongHanbat Natl Univ, Dept Mat Sci & Engn, Daejeon 34158, South Korea
- Jeong, HojinKorea Inst Mat Sci KIMS, Chang Won 51508, South Korea
- Kim, GiyeongKorea Inst Mat Sci KIMS, Chang Won 51508, South Korea
- 안성일Pusan Natl Univ, Grad Dept Chem Mat, Busan 46241, South Korea
- Park, Joon Sik교신저자Hanbat Natl Univ, Dept Mat Sci & Engn, Daejeon 34158, South Korea
- Choi, Joon-Hwan교신저자Korea Inst Mat Sci KIMS, Chang Won 51508, South Korea
초록
© 2021 by the authors. Licensee MDPI, Basel, Switzerland.Pt/γ-Al2O3 catalysts coated on honeycomb-shaped stainless STS-444 steel substrates with a γ-Al2O3 intermediate layer were prepared using a conventional washcoating method. The intermediate layer was formed on the substrate surface through oxidation using pack cementation. The monolithic catalysts with the intermediate layer were fabricated for potential applications to preturbocharger catalysts, which suffer from severe conditions such as vibrations of the engine and high flow rates of exhaust gas. Adhesive strength tests and simultaneous oxidation reactions of CO and C3H6 were carried out for the Pt/γ-Al2O3 monolithic catalysts with and without the intermediate layer. The catalysts with an intermediate layer showed much stronger adhesion than the catalysts without an intermediate layer. Thus, the formation of a γ-Al2O3 intermediate layer by surface oxidation through pack cementation facilitated a significant enhancement of the catalyst adhesion strength without catalytic performance degradation.
키워드
Catalyst adhesionCO and C3H6 conversionIntermediate layerMetallic monolith catalystPt/γ-Al2O3GAS SEPARATION PERFORMANCECARBONSUPPORTSBEHAVIOR
식별자
- Scopus EID
- 2-s2.0-85121871865
- WoS UID
- 000747872100001



로그인
연구물 목록으로