본문 바로가기

변형각의 측정 위치에 따른 6인치 탄소강관엘보의 파괴기준

Failure Criteria of a 6-Inch Carbon Steel Pipe Elbow According to Deformation Angle Measurement Positions

문서 유형
연구출판물 · 학술지 논문
등재
KCIScopus
저널 순위
KCI Q2
저널
한국지진공학회논문집 (EESK)26(1) · pp.13 · 2022
피인용
Scopus 0KCI 0
FWCI (Scopus)
0
ISSN
1226-525X

저자

  1. 윤다운제1저자Researcher, Research Professor, Seismic Research and Test Center, Pusan National University
  2. 전법규Researcher, Research Professor, Seismic Research and Test Center, Pusan National University
  3. 장성진Researcher, Research Professor, Seismic Research and Test Center, Pusan National University
  4. 박동욱Researcher, Research Professor, Seismic Research and Test Center, Pusan National University
  5. 김성완교신저자Researcher, Research Professor, Seismic Research and Test Center, Pusan National University

초록

This study proposes a low-cycle fatigue life derived from measurement points on pipe elbows, which are components that are vulnerable to seismic load in the interface piping systems of nuclear power plants that use seismic isolation systems. In order to quantitatively define limit states regarding leakage, i.e., actual failure caused by low-cycle fatigue, in-plane cyclic loading tests were performed using a sine wave of constant amplitude. The test specimens consisted of SCH40 6-inch carbon steel pipe elbows and straight pipes, and an image processing method was used to measure the nonlinear behavior of the test specimens. The leakage lines caused by low-cycle fatigue and the low-cycle fatigue curves were compared and analyzed using the relationship between the relative deformation angles, which were measured based on each of the measurement points on the straight pipe, and the moment, which was measured at the center of the pipe elbow. Damage indices based on the combination of ductility and dissipation energy at each measurement point were used to quantitatively express the time at which leakage occurs due to through-wall cracking in the pipe elbow.

키워드

Nuclear power plantInterface piping systemPipe elbowLimit state

식별자

Scopus EID
2-s2.0-105040595015
KCI
ART002792960