Fabrication of perforated PDMS microchannel by successive laser pyrolysis
- 문서 유형
- 연구출판물 · 학술지 논문
- 등재
- SCIEScopus
- 저널 순위
- JCR Q1Scopus Q2
- 저널
- MATERIALS14(23) · 2021
- 피인용
- Web of Science 16Scopus 18
- FWCI (Scopus)
- 0.71
- JCR IF
- JCR 2020 3.623
- ISSN
- 1996-1944
저자
- Min, Koungjun제1저자Hanyang Univ, BK21 FOUR ERICA ACE Ctr, Dept Mech Engn, 55 Hanyangdaehak Ro, Ansan 15588, South Korea
- Lim, JaemookHanyang Univ, BK21 FOUR ERICA ACE Ctr, Dept Mech Engn, 55 Hanyangdaehak Ro, Ansan 15588, South Korea
- Lim, Ji HwanHanyang Univ, BK21 FOUR ERICA ACE Ctr, Dept Mech Engn, 55 Hanyangdaehak Ro, Ansan 15588, South Korea
- Hwang, EunseungHanyang Univ, BK21 FOUR ERICA ACE Ctr, Dept Mech Engn, 55 Hanyangdaehak Ro, Ansan 15588, South Korea
- Kim, YoungchanHanyang Univ, BK21 FOUR ERICA ACE Ctr, Dept Mech Engn, 55 Hanyangdaehak Ro, Ansan 15588, South Korea
- Lee, Hyunkoo교신저자Hanyang Univ, BK21 FOUR ERICA ACE Ctr, Dept Mech Engn, 55 Hanyangdaehak Ro, Ansan 15588, South Korea
- 이하범교신저자Pusan Natl Univ, Sch Mech Engn, 2 Busandaehak Ro 63 Beon Gil, Busan 46241, South Korea
- Hong, Sukjoon교신저자Hanyang Univ, BK21 FOUR ERICA ACE Ctr, Dept Mech Engn, 55 Hanyangdaehak Ro, Ansan 15588, South Korea
초록
© 2021 by the authors. Licensee MDPI, Basel, Switzerland.Poly(dimethylsiloxane) has attracted much attention in soft lithography and has also been preferred as a platform for a photochemical reaction, thanks to its outstanding characteristics including ease of use, nontoxicity, and high optical transmittance. However, the low stiffness of PDMS, an obvious advantage for soft lithography, is often treated as an obstacle in conducting precise handling or maintaining its structural integrity. For these reasons, a Glass-PDMS-Glass structure has emerged as a straightforward alternative. Nevertheless, several challenges are remaining in fabricating Glass-PDMS-Glass structure through the conventional PDMS patterning techniques such as photolithography and etching processes for master mold. The complicated techniques are not suitable for frequent design modifications in research-oriented fields, and fabrication of perforated PDMS is hard to achieve using mold replication. Herein, we utilize the successive laser pyrolysis technique to pattern thin-film PDMS for microfluidic applications. The direct use of thin film at the glass surface prevents the difficulties of thin-film handling. Through the precise control of photothermal pyrolysis phenomena, we provide a facile fabrication process for perforated PDMS microchannels. In the final demonstration, the laminar flow has been successfully created owing to the smooth surface profile. We envision further applications using rapid prototyping of the perforated PDMS microchannel.
키워드
Glass-PDMS-Glass configurationLaser-induced pyrolysisPerforated PDMS microchannelTHERMAL-CONDUCTIVITYLOW-COSTPOLYDIMETHYLSILOXANEPOLY(DIMETHYLSILOXANE)ELECTROPHORESISTEMPERATURE
식별자
- Scopus EID
- 2-s2.0-85120322227
- WoS UID
- 000735266200001



로그인
연구물 목록으로