본문 바로가기

Effect of Injected Oxygen Amount on the Gas Porosity and Mechanical Properties of a Pore-Free Die-Cast Al-Si-Cu Alloy

문서 유형
연구출판물 · 학술지 논문
등재
SCIEScopus
저널 순위
JCR Q2Scopus Q2
저널
METALS11(11) · #1805 · 2021
피인용
Web of Science 7Scopus 8
FWCI (Scopus)
0.37
JCR IF
JCR 2020 2.351
ISSN
2075-4701

저자

  1. 강호정제1저자Pusan Natl Univ, Dept Mat Sci & Engn, Busan 46200, South Korea
  2. 장호성Pusan Natl Univ, Dept Mat Sci & Engn, Busan 46200, South Korea
  3. 오성효Pusan Natl Univ, Dept Mat Sci & Engn, Busan 46200, South Korea
  4. Yoon, Pil-HwanKorea Inst Ind Technol, Adv Forming Proc R&D Grp, Ulsan 44776, South Korea
  5. Lee, Gyu-HeunKorea Inst Ind Technol, Adv Forming Proc R&D Grp, Ulsan 44776, South Korea
  6. Park, Jin-Young교신저자Korea Inst Ind Technol, Adv Forming Proc R&D Grp, Ulsan 44776, South Korea
  7. 최윤석교신저자Pusan Natl Univ, Dept Mat Sci & Engn, Busan 46200, South Korea

초록

With the rise in the demand for eco-friendly and electric vehicles, welding and heat treatment are becoming very important to meet the necessary weight reduction, complexity, and high functionality of die castings. Pore-free (PF) die casting is an effective process that enables heat treatment and welding due to low gas porosities. Indeed, this process affords castings of low gas porosity, similar to those attained by high-vacuum die casting. In this study, we compared the gas porosities of different castings fabricated by PF die casting using varied injected oxygen amounts. The castings were all subjected to T6 heat treatment and analyzed by computed tomography (CT) to compare their microstructure and mechanical properties before and after T6 heat treatment. The results revealed that with the increasing injected oxygen amount, the gas porosity of the specimens decreased while their mechanical properties increased. In particular, the gas porosity was the lowest at 1.26 L. Moreover, the 1.26 L specimen displayed the best tensile strength, yield strength, and elongation results. Finally, Weibull distribution analysis revealed that the tensile strength and elongation repeatability and reproducibility increased with increasing injected oxygen amount.

키워드

high-pressure die casting (HPDC)pore-free DCinjected oxygen amountgas porositymechanical properties

식별자

Scopus EID
2-s2.0-85118691029
WoS UID
000723485200001